Расходные материалы для хроматографии

J&W Ultra 2 GC Column, 12 m, 0.20 mm, 0.33 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W Ultra 2 GC Column, 25 m, 0.20 mm, 0.11 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W Ultra 2 GC Column, 25 m, 0.20 mm, 0.33 µm, 5 inch cage

J&W Ultra 2 GC Column, 25 m, 0.20 mm, 0.33 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W Ultra 2 GC Column, 25 m, 0.20 mm, 0.33 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W Ultra 2 GC Column, 25 m, 0.32 mm, 0.17 µm

J&W Ultra 2 GC Column, 25 m, 0.32 mm, 0.17 µm, 5 inch cage

J&W Ultra 2 GC Column, 25 m, 0.32 mm, 0.52 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W Ultra 2 GC Column, 25 m, 0.32 mm, 0.52 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W Ultra 2 GC Column, 50 m, 0.20 mm, 0.11 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W Ultra 2 GC Column, 50 m, 0.20 mm, 0.33 µm, 5 inch cage

J&W Ultra 2 GC Column, 50 m, 0.20 mm, 0.33 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W Ultra 2 GC Column, 50 m, 0.32 mm, 0.17 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W Ultra 2 GC Column, 50 m, 0.32 mm, 0.52 µm, 5 inch cage

J&W Ultra 2 GC Column, 50 m, 0.32 mm, 0.52 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

Agilent InfinityLab PFC-free HPLC Conversion Kit. For 1290 Infinity II systems with G7120A & G7167B. In trace-level PFAS analysis, the per- and polyfluorinated compounds (PFC)-free

Cabinet Upgrade Kit, for G1329A autosampler

Inline filter upgrade kit, for quaternary pump. New advanced model available: InfinityLab Quick Change inline filter (PN 5067-1603). Clamp is available separately: PN G4204-40000

Ultra low dispersion kit, bio, for use with 1290 Infinity II Bio System

Wash pump seal kit, for 1260 Infinity SFC

SFC/MS connection/splitter kit

J&W DB-WAX GC Column, 10 m, 0.05 mm, 0.05 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 10 m, 0.05 mm, 0.10 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 10 m, 0.10 mm, 0.10 µm, 5 inch cage

J&W DB-WAX GC Column, 10 m, 0.10 mm, 0.10 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 10 m, 0.10 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 10 m, 0.10 mm, 0.20 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W DB-WAX GC Column, 15 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W DB-WAX GC Column, 15 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 15 m, 0.25 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 15 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 15 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 15 m, 0.53 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 15 m, 0.53 mm, 1.00 µm, 5 inch cage

J&W DB-WAX GC Column, 15 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 20 m, 0.10 mm, 0.10 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 20 m, 0.10 mm, 0.10 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W DB-WAX GC Column, 20 m, 0.10 mm, 0.20 µm, 5 inch cage

J&W DB-WAX GC Column, 20 m, 0.10 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 20 m, 0.18 mm, 0.18 µm, 5 inch cage

J&W DB-WAX GC Column, 25 m, 0.20 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.20 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.25 mm, 0.15 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W DB-WAX GC Column, 30 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.25 mm, 0.50 µm, 5 inch cage

J&W DB-WAX GC Column, 30 m, 0.25 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.32 mm, 0.15 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.32 mm, 0.25 µm, 5 inch cage

J&W DB-WAX GC Column, 30 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.32 mm, 0.50 µm, 5 inch cage

J&W DB-WAX GC Column, 30 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.45 mm, 0.85 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.53 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.53 mm, 0.25 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W DB-WAX GC Column, 30 m, 0.53 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.53 mm, 1.00 µm, 5 inch cage

J&W DB-WAX GC Column, 30 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 30 m, 0.53 mm, 1.00 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W DB-WAX GC Column, 40 m, 0.18 mm, 0.18 µm, 5 inch cage

J&W DB-WAX GC Column, 10 m, 0.18 mm, 0.18 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 20 m, 0.18 mm, 0.18 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 50 m, 0.20 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 20 m, 0.18 mm, 0.30 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 60 m, 0.25 mm, 0.15 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 40 m, 0.18 mm, 0.18 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 60 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W DB-WAX GC Column, 40 m, 0.18 mm, 0.30 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 60 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 60 m, 0.25 mm, 0.50 µm, 5 inch cage

J&W DB-WAX GC Column, 60 m, 0.25 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 60 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 60 m, 0.32 mm, 0.50 µm, 5 inch cage

J&W DB-WAX GC Column, 60 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-WAX GC Column, 60 m, 0.53 mm, 1.00 µm, 5 inch cage

J&W DB-WAX GC Column, 60 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

Quick Turn Capillary MP35N 0.12 x 700mm

Quick Turn capillary stainless steel 0.12 x 130 mm No/M4

1290 Bio Capillary Interconnect Assembly. MP35N, coiled with 2 fittings

Bypass capillary, for use with the 1290 Infinity II Preparative Open-Bed Sampler/Collector

Capillary damper, stainless steel 0.6 mm id, rigid, bend. for 1120/1220 Compact LC pump

Capillary for inline filter stainless steel 0.12 x 50 mm flexible

Capillary MP35N 0.12 x 2000 mm U/U. restriction capillary with two female connector fittings

Capillary MP35N 0.12 x 50 mm SX . capillary for use with Infinity II Bio Inline filter

Capillary MP35N 0.17 x 1400mm. coiled, without fittings

Capillary MP35N 0.35 x 1247mm M4/M4, 120µl. pre-swaged M4 fittings with gold ferrule, use with 2D-LC system

Capillary MP35N 0.35 x 420mm M4/M4. 40µl. pre-swaged M4 fittings with gold ferrule, use with 2D-LC system

Capillary MP35N 0.35x831 M4/M4 80µl. pre-swaged M4 fittings with gold ferrule, use with 2D-LC system

Capillary PEEK/Fused silica 50 µm x 400 mm. Inlet capillary for DAD Nano-Flow Cell 80

Capillary stainless steel 0.05 x 1000 mm coiled no fittings. Part of the SFC/MS Splitter Kit (p/n G4309-68715).

Capillary stainless steel 0.05mm x 500 mm coiled no fittings. Part of the SFC/MS Splitter Kit (p/n G4309-68715).

Capillary stainless steel 0.12 x 130 mm S/U ps/ns

Capillary stainless steel 0.12 x 170 mm M4/U ns/ps

Capillary stainless steel 0.12 x 2000 mm U/U. restriction capillary with female connectors

Capillary stainless steel 0.12 x 50 mm, S/U ns/ps

Capillary stainless steel 0.12 x 500mm S/E ns/ps. Special capillary for connecting into DAD flow cell

Capillary stainless steel 0.12 x 70 mm S/U ns/ps

Capillary stainless steel 0.12 x 75 mm M4/U ns/ps

Capillary stainless steel 0.12 x 90 mm S/U ns/ps

Capillary stainless steel 0.17 x 150 mm S/U ps/ps

Capillary stainless steel 0.25 x 160 mm S/SH ps/ps

Capillary stainless steel 0.6 x 111 mm 1/16 in male. rigid, bent

Capillary stainless steel 0.6 x 170mm S/S. rigid, comes pre-bent for use with 1100/1200/1260/1260 Infinity II Preparative pump

Capillary stainless steel 0.6 x 270 mm S/S. rigid, comes pre-bent for use with 1100/1200/1260/1260 Infinity II Preparative pump

Capillary stainless steel 0.6 x 367 mm 1/16 in male. rigid, bent

Capillary stainless steel 0.6 x 40 mm 1/16 in male. rigid, bent

Capillary stainless steel 0.94 x 1000 mm SX/No ps/-

Capillary stainless steel 0.94 x 500 mm SX/No ps/-

Capillary stainless steel 0.94 x 550 mm SX/SI ps/ps

Capillary stainless steel 0.94 x 650 mm SX/No ps/-

Capillary stainless steel 0.94 x 650 mm SX/SX ps/ps

Capillary stainless steel 0.94 x 800 mm SX/No ps/-

Capillary stainless steel rigid 0.12 x 60 mm S/S ps/ps

Capillary, damper to purge valve . static mixer bypass capillary

Capillary, PEEK, stainless-steel clad, 0.17 mm id, 500 mm length, special. Outlet capillary for bio-inert flow cell DAD

Capillary, PEEK/fused silica, 100 µm id, 150 mm length, 3x fittings. Needle seat capillary for Micro Well Plate Sampler

Capillary, PEEK/fused silica, 50 µm id, 400 mm length, 2x fittings, 1 union. OQ/PV capillary for u-LC system

Capillary, PEEK/fused silica, 75 µm id, 150 mm length, 3x fittings. Needle seat capillary for Micro Well Plate Sampler

Capillary, SFC booster pump, out, rigid stainless steel

Capillary, stainless steel, 0.12 mm id, 170 mm length, 2 x M4 fittings preswaged. Special capillary for use with the 2D-LC Active Solvent ModulationValve Kit.

Capillary, stainless steel, 0.12 mm id, 340 mm length, 2 x M4 fittings preswaged. Special capillary for use with the 2D-LC Active Solvent ModulationValve Kit.

Capillary, stainless steel, 0.12 mm id, 680 mm length, 2 x M4 fittings preswaged. Special capillary for use with the 2D-LC Active Solvent ModulationValve Kit.

Capillary, stainless steel, 0.12 x 85 mm, 2x M4 fittings pre-swaged. Special capillary for use with the 2D-LC Active Solvent ModulationValve Kit.

Capillary, stainless steel, 0.35 x 1870mm, SL/SL, 2D-LC loop 180 µL

Capillary, stainless steel, 0.5 mm id, 250 mm length, special. Connecting capillary for preparative DAD flow cell (G1315-60016)

Capillary, stainless steel, special, 0.25 mm id, 130 mm length, 1x fitting. tubing, waste outlet for Micro Well Plate Sampler

Capillary, titanium, damper to pump head. 0.6mm ID, 234mm length, rigid, pre-bent

Capillary, titanium, pump chamber 1 (OBV) to damper. 0.6mm ID, 248mm length, rigid, pre-bent

PEEK capillary for use with micro inline filter, 25 µm x 10 cm

Restriction Capillary Injector Purge Kit. Stainless Steel Capillary 250 x 0.12 mm S/- no socket

Stainless steel capillary 0.12 mm x 30 mm rigid. For use with 1290 Infinity inline filter,

Capillary MP35N 0.12 x 105 mm SL/No ps/-

Capillary MP35N 0.12 x 120 mm SX/SX ns/ns. non-swaged fittings with gold ferrule

Capillary MP35N 0.12 x 130 mm M4/SL ps/ps

Capillary MP35N 0.12 x 130 mm No/M4

Capillary MP35N 0.12 x 150 mm M4/M4 ps/ps. two pre-swaged M4 fittings

Capillary MP35N 0.12 x 170mm M4/M4 ps/ps. Transfer Capillary Bio 2D-LC ASM Valve, pre-swaged M4 fittings with gold ferrule

Capillary MP35N 0.12 x 170mm M4/M4 ps/ps. pre-swaged M4 fittings with gold ferrule

Capillary MP35N 0.12 x 200mm SI/SX ps/ns. fittings with gold ferrule

Capillary MP35N 0.12 x 280 mm M4/SL ps/ps

Capillary MP35N 0.12 x 340mm M4/M4. pre-swaged M4 fittings with gold ferrule

Capillary MP35N 0.12 x 500 mm SI/SI ps/ns

Capillary MP35N 0.12 x 500 mm SL/M4 ps/ps

Capillary MP35N 0.12 x 600mm no fittings

Capillary MP35N 0.12 x 680mm M4/M4. pre-swaged M4 fittings with gold ferrule

Capillary MP35N 0.12 x 85mm M4/M4 ps/ps. pre-swaged M4 fittings with gold ferrule

Capillary MP35N 0.12 x 90 mm SI/SX ns/ns. non-swaged fittings with gold ferrule

Capillary MP35N 0.17 x 130 mm SI/SX

Capillary MP35N 0.17 x 700 mm SI/SX ns/ps. fittings with gold ferrule

Capillary MP35N 0.17 x 90 mm SI/SX ps/ps

Capillary MP35N 0.25 x 250mm SI/SI ps/ps

Capillary MP35N 0.3 x 80mm, SL/SL, ps/ps

Capillary MP35N 0.35 x 104 mm, M4/M4, 10ul. pre-swaged M4 fittings with gold ferrule, use with 2D-LC system

Capillary MP35N 0.35 x 1870mm M4/M4 180µl. pre-swaged M4 fittings with gold ferrule, use with 2D-LC system

Capillary MP35N 0.35 x 208mm M4/M4, 20µl. pre-swaged M4 fittings with gold ferrule, use with 2D-LC system

Capillary PEEK/ST 0.17 x 105 mm RLO/RLO

Capillary PEEK/ST 0.17 x 150 mm RLO/RLO

Capillary PEEK/ST 0.17 x 200 mm RLO/RLO

Capillary PEEK/ST 0.17 x 300 mm RLO/RLO

Capillary PEEK/ST 0.17 x 400 mm RLO/RLO

Capillary PEEK/ST 0.17 x 500 mm RLO/RLO

Capillary PEEK/ST 0.17 x 700 mm RLO/RLO

Capillary stainless steel 0.12 x 100mm M4/M4 ns/ns

Capillary Stainless Steel 0,12 x 120mm SL/SL ns/ps

Capillary Stainless Steel 0,17 x 120mm SL/SL ns/ps

Capillary stainless steel 0.075 x 220 mm, SV/SLV ns/ns

Capillary stainless steel 0.075 x 340 mm SV/SLV ns/ns

Capillary stainless steel 0.12 mm x 500 mm M4/M4 ps/ps

Capillary stainless steel 0.12 x 1000 mm SL/SL ns/ns

Capillary stainless steel 0.12 x 105 mm no fittings

Capillary stainless steel 0.12 x 105 mm S/S ps/ns

Capillary stainless steel 0.12 x 105 mm SL/none ps/-

Capillary stainless steel 0.12 x 105mm SL/SL ps/ps

Capillary stainless steel 0.12 x 120 mm SX/SX ns/ns

Capillary stainless steel 0.12 x 120 mm SX/SX ps/ps

Capillary stainless steel 0.12 x 1200 mm SX/SX ps/ps

J&W DB-HeavyWAX Column, 40 m, 0.18 mm, 0.18 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-HeavyWAX GC column, 10 m, 0.10 mm, 0.10 µm

J&W DB-HeavyWAX GC column, 10 m, 0.18 mm, 0.18 μm

J&W DB-HeavyWAX GC column, 15 m, 0.32 mm, 0.25 µm

J&W DB-HeavyWAX GC column, 15m, 0.25mm, 0.25µm

J&W DB-HeavyWAX GC column, 20 m, 0.18 mm, 0.18 µm

J&W DB-HeavyWAX GC column, 25m, 0.25mm, 0.20µm

J&W DB-HeavyWAX GC column, 30 m, 0.25 mm, 0.25 µm

J&W DB-HeavyWAX GC column, 30 m, 0.25 mm, 0.50 µm

J&W DB-HeavyWAX GC column, 30 m, 0.32 mm, 0.25 µm

J&W DB-HeavyWAX GC column, 30 m, 0.32 mm, 0.50 µm

J&W DB-HeavyWAX GC column, 50 m, 0.25 mm, 0.20 µm

J&W DB-HeavyWAX GC column, 50 m, 0.32 mm, 0.20 µm

J&W DB-HeavyWAX GC column, 60 m, 0.25 mm, 0.25 µm

J&W DB-HeavyWAX GC column, 60 m, 0.25 mm, 0.50 µm

J&W DB-HeavyWAX GC column, 60 m, 0.32 mm, 0.25 µm

J&W DB-HeavyWAX GC column, 60 m, 0.32 mm, 0.50 µm

Capillary kit for 2 position/10 port switching valve bio

Capillary Kit for 6-Column Selector Valve. Bio-compatible, 0.12mm ID. 1290 Infinity II Bio LC System

Capillary tubing kit starter kit, 0.12 mm. Capillary tubing starter kit, 0.12 mm id., includes stainless steel capillaries (4 x 105 mm, 4 x 150 mm, 2 x 170 mm, 2 x 200 mm, 1 x 220

Capillary tubing starter kit, 0.17 mm id

Capillary tubing starter kit, bio-inert, 0.17mm

Capillary tubing starter kit, PEEK coated fused silica, 50 and 100 µm id, for 1100 Capillary LC (with 20 µL/min flow sensor)

InfinityLab capillary kit, for 1260 Infinity II LC

InfinityLab capillary kit, for 1290 Infinity II LC

InfinityLab convenience kit, for 1260 Infinity II bio-inert LC

InfinityLab convenience kit, for 1260 Infinity II LC

InfinityLab convenience kit, for 1290 Infinity II LC

Low dispersion capillary kit for G1316C. includes 0.12mm id capillaries, length 280mm (2x), 105mm (2x), plus low dispersion double heat exchanger (1x),

Capillary kit, for online SPE multi cartridge solution

Ultra-low dispersion kit for Agilent 1290 Infinity LC Series. includes low dispersion heat exchanger, 0.075mm id capillaries, length 340mm (1x), 220mm (1x), plus Ultra Low Dispersi

Capillary tubing kit, 0.12 mm id, flexible stainless steel, 5/pk

Capillary tubing kit, 0.12 mm id, flexible stainless steel, 6/pk

Capillary tubing kit, 0.17 mm ID, for 2 pos/10 port micro valve. for use in G1316C, includes capillaries with M4 fittings to connect to micro ports

Capillary tubing kit, for Agilent Online-SPE Direct Injection Kit G4744A

GPC/SEC Tubing Starter Kit. Includes tubing, fittings, and tools: 1/16 inch od stainless steel tubing: 20 cm (4 each), 30 cm (2 each), 10 cm (3 each), 100 cm (1 each); 2 mm od, 1.4

InfinityLab knitted delay coils kit, for use in mass-based prep systems, for flow rate 4–8 mL/min or 9.4 mm id columns

InfinityLab knitted delay coils kit, for use in mass-based prep systems, for flow rates 15–40 mL/min or 21.2 mm id columns. contains 1 each delay coils 0.7mL, 1.5mL, 3.8mL and 3 ea

InfinityLab knitted delay coils kit, for use in mass-based preparative systems

InfinityLab knitted delay coils kit, for use in mass-based preparative systems, for flow rate 40–80 mL/min

Online SPE starter kit, includes tubing, fittings, 3 cartridges, method and technical note

Method development capilary kit, 0.12mm id. supports up to eight short columns for installation into multi column compartment

PFC free Multiwash Tubing Kit. Includes PEEK tubing and Fittings for G7167B

J&W DB-FFAP GC Column, 10 m, 0.10 mm, 0.10 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 10 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 15 m, 0.10 mm, 0.10 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 15 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 15 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 15 m, 0.53 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 15 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 25 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 30 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W DB-FFAP GC Column, 30 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 30 m, 0.25 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 30 m, 0.32 mm, 0.25 µm, 5 inch cage

J&W DB-FFAP GC Column, 30 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 30 m, 0.32 mm, 0.50 µm, 5 inch cage

J&W DB-FFAP GC Column, 30 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 30 m, 0.32 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 30 m, 0.45 mm, 0.85 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 30 m, 0.53 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 30 m, 0.53 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 30 m, 0.53 mm, 1.00 µm, 5 inch cage

J&W DB-FFAP GC Column, 30 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 30 m, 0.53 mm, 1.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 50 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 60 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W DB-FFAP GC Column, 60 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 60 m, 0.25 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 60 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 60 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 60 m, 0.32 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-FFAP GC Column, 60 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

Blank Nut, bio-compatible, MP35N, for M4 port

Ferrule, back, 1/16 in, stainless steel, 10/pk

Ferrule, front 1/16 in, stainless steel, 10/pk

Ferrule, front sealed, ID 0.8mm. use with 0.8mm (1/32") OD fused silica/PEEK capillaries, use screw pn 5023-0232

Fitting screws, stainless steel, 1/16 inch, for 10-32 port, 4 mm screw head, 10/pk

Fitting screws, stainless steel, for 10-32 port, 4 mm screw head, 5/pk

Fitting, bio compatible, stainless steel, gold-plated ferrule, 1.6 mm id, 10/pk

Fitting, for ESD-PEEK tubing, 5/16 to 3/16 inch, 12/pk

Fitting, male, 1/16 in, stainless steel, 10/pk

Front ferrules, 1/16in, gold, 10/Pk. for bio-inert and bio-compatible fitting connections

Luer adapter, female luer to 1/4-28 FEM

M4 fitting ferrule, stainless steel, 6/pk, for 1/32 inch (0.8 mm) OD capillary. use with screw 5067-1558

M4 fitting screw, stainless steel, 6/pk, for 1/32 inch (0.8 mm) OD capillary. use with ferrule 5067-1557

M4 fitting, PEEK, incl. 6 fittings and 2 plugs

Nut and ferrule, stainless steel, 1/8 inch, for sample loop for switching valve

Nut beige, headless 1/4-28, 1/8 in for V1P4

Nut driver, 1/4 in, drilled shaft, for FID jets

Nut extender, large

Nut extender, medium

Nut extender, small

Nut, beige, flat 10-32, 1/32 in, MS inlet

Nut, male, Tefzel, 4/pk. Flangeless Fitting for 1/8" (3.2mm) OD tubing, 1/4-28 Flat-Bottom

PEEK ferrule and stainless steel lock ring, for 0.8 mm tubings, 10/pk. use with screw 5063-6593

PEEK ferrule and stainless steel lock ring, for 2 mm tubings, 5/pk

PEEK fitting finger-tight, 10/pk, for 1/16 inch (1.6 mm) OD capillary

Plastic Fitting. blank nut, low pressure plug, PE, for 10-32 UNF port

Plastic Fitting Plug, 20/pack

Plug, PTFE, for 1/4-28 flat bottom, 1/pk

Seal tight screw, stainless steel, 4 mm

Stainless steel fittings with extra long screw (SX), 10/pack. 1.6mm ID, includes fitting screws (length: 17mm), front and back ferrules

Stainless steel fittings with intermediate long screw (SI), 10/pack. 1.6mm ID, includes stainless steel fitting screws (length: 11mm), front and back ferrules

Stainless steel fittings with long screw (SL), 10/pack. 1.6mm ID, includes fitting screws (length: 14mm), front and back ferrules

Stainless steel fittings with short screw (S), 10/pack. 1.6mm ID, includes fitting screws (length: 9.5mm), front and back ferrules

Stainless steel nut and PEEK ferrule, 6/pk, . for 1/16 inch (1.6 mm) OD capillary, 10-32 thread

Swagelok fitting ferrule, PEEK, 6/pk, for 1/16 inch (1.6 mm) OD capillary. use with screw 5067-1540

Swagelok fitting, 1200 bar, removable, extra long, for 1/16 inch (1.6mm) capillary

Swagelok fitting, 1200 bar, removable, for 1/16 inch (1.6mm) capillary

Swagelok fitting, 1200 bar, removable, long, for 1/16 inch (1.6mm) capillary

Swagelok fitting, PEEK, double-winged, 2-piece, 10/pk, for 1/16 inch (1.6 mm) OD capillary

Swagelok fitting, PEEK, double-winged, 2-piece, 10/pk, for 1/32 inch (0.8 mm) OD capillary

Swagelok fitting, PEEK, for 1/16 inch (1.6 mm) OD capillary, mixed colors, 10/pk

Swagelok fitting, PEEK, long, for 1/16 inch (1.6 mm) OD capillary, 10/pk

Swagelok fitting, PEEK, long, for 1/32 inch (0.8 mm) OD capillary

Swagelok fitting, PEEK, RheFlex 2-piece fittings, 5/pk

Swagelok fitting, PEEK, RheFlex 2-piece fittings, mixed colors, 10/pk

Swagelok fitting, polyketone, 10/pk, for 1/16 inch (1.6 mm) OD capillary

Swagelok, 1.6 mm ID, PEEK, finger-tight fitting 2/pack. for 1/16in OD tubing

UHP-FF fitting, bio inert. for use with stainless steel-coated PEEK and stainless steel capillaries

DB-WAX Ultra Inert 40m, 0.18mm, 0.18um

J&W DB-WAX Ultra Inert, 15 m, 0.25 mm, 0.25 μm

J&W DB-WAX Ultra Inert, 15 m, 0.32 mm, 0.25 μm

J&W DB-WAX Ultra Inert, 15 m, 0.53 mm, 1.00 μm

J&W DB-WAX Ultra Inert, 20 m, 0.18 mm, 0.18 μm

J&W DB-WAX Ultra Inert, 20 m, 0.18 mm, 0.3 μm

J&W DB-WAX Ultra Inert, 25 m, 0.20 mm, 0.20 μm

J&W DB-WAX Ultra Inert, 30 m, 0.25 mm, 0.25 μm

J&W DB-WAX Ultra Inert, 30 m, 0.25 mm, 0.50 μm

J&W DB-WAX Ultra Inert, 30 m, 0.32 mm, 0.25 μm

J&W DB-WAX Ultra Inert, 30 m, 0.32 mm, 0.50 μm

J&W DB-WAX Ultra Inert, 30 m, 0.53 mm, 0.25 μm

J&W DB-WAX Ultra Inert, 30 m, 0.53 mm, 0.50 μm

J&W DB-WAX Ultra Inert, 30 m, 0.53 mm, 1.00 μm

J&W DB-WAX Ultra Inert, 60 m, 0.25 mm, 0.25 μm

J&W DB-WAX Ultra Inert, 60 m, 0.25 mm, 0.50 μm

J&W DB-WAX Ultra Inert, 60 m, 0.32 mm, 0.25 μm

J&W DB-WAX Ultra Inert, 60 m, 0.32 mm, 0.50 μm

J&W DB-WAX Ultra Inert, 60 m, 0.53 mm, 1.00 μm

J&W DB-WAX Ultra Inert GC column, 10 m, 0.18 mm, 0.18 µm, 7 inch cage. J&W DB-WAX Ultra Inert GC Column, 10 m, 0.18 mm, 0.18 µm, 7 inch cage. This is the most common GC column format compatib

J&W DB-WAX Ultra Inert GC column, 40 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W DB-WAX Ultra Inert, 30 m, 0.32 mm, 0.25 μm, 5 inch cage

Tubing, Solenoids to 6-Port, Deactivated

Capillary stainless steel 0.25 x 700 mm S/S ps/ns

Clamps and micro clamps to organize tubings in the 1100 Series LC system, 10/pk

PEEK tubing, 1/32 in. od, 0.4 mm ID, 450 mm

PTFE connecting tubing, 160 mm long, 0.7 mm ID with fittings. for SSV/MCGV

Solvent tubing, PTFE, 16 cm long, 1.5 mm id, 3.0 mm od

Tubing assembly, 3 m, PTFE 1/8 in od, 1/16 in id. For G2258A 1100/1200 Series Dual Loop Autosampler

Tubing ETFE, 700 mm, 0.5 mm id, 1.6 mm od, Fittings. Autosampler to flexible cube tube

Tubing, beige, 1/32 in, loop, V1P2-V1P5

Tubing, beige, 1/32 in, sipper tube for V1P3

Tubing, beige, outer diameter 1/32 in

Tubing, copper, 1/8 in x 1.65 mm id, 12 ft

Tubing, copper, 1/8 in x 1.65 mm id, 50 ft

Tubing, FEP, 180mm, 0.7mm id, 1.6mm od, Fittings. LC pump connecting tubing, Gradient valve to pump

Tubing, gas sampling 1/16 inch, SS with fittings

Tubing, grey, 1/32 in for V3P1-V1P6

Tubing, grey, 1/32 in for V3P3-V3P4

Tubing, grey, 1/32 in for V4P2-V1P6

Tubing, Halar, white, 1/8 in for V1P4

Tubing, PEEK, 1.6 mm od, 0.13 mm id, 1.5 m

Tubing, PEEK, 1.6 mm od, 0.13 mm id, 5 m

Tubing, PEEK, 1.6 mm od, 0.18 mm id, 1.5 m. yellow

Tubing, PEEK, 1.6 mm od, 0.18 mm id, 5 m

Tubing, PEEK, 1.6 mm od, 0.25 mm id, 1.5 m

Tubing, PEEK, 1.6 mm od, 0.25 mm id, 5 m

Tubing, PEEK, 1.6 mm od, 0.5 mm id, 1.5 m

Tubing, PTFE (ESD), 0.8 mm id, 1.6 mm od, 6 m

Tubing, PTFE, 5 m, 1.5 mm id

Tubing, PTFE, convoluted, 1 inch id x 6 ft

Tubing, red, 1/32 in for V1P1-V2P6

Tubing, red, outer diameter 1/32 in for V2P2

Tubing, red, outer diameter 1/32 in, V2P1

Tubing, red, outer diameter 1/32 in, V2P4

Tubing, stainless steel, 1/8 in x 2.1 mm, 20 ft

Tubing, Tygon, for peristaltic pump, 6/pk

Tubing, UltiMetal Plus, 1/16 in x 1.0 mm, 10 m

Tubing, UltiMetal Plus, 1/8 in x 2.1 mm, 10 m

Waste tube, 0.8 mm id, 15 cm long, PTFE. For G2258A 1100/1200 Series Dual Loop Autosampler

Waste tube, FEP, 1.6 mm od, 0.8 mm id. For G1387A 1100/1200 Series Micro Autosampler

Waste tube, PTFE, 12 cm, 0.7 mm id. with pre-swaged stainless-steel fitting

Waste tubing, 5 m, 6.5 mm id, corrugated polyethylene

PEEK capillary, 0.25 mm id, 160 mm

Capillary stainless steel 0.3 x 80 mm SL/SL ps/ps

Capillary, stainless steel, 0.17 x 130 mm, S/no ps/-

J&W DB-WAXetr GC Column, 15 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 15 m, 0.32 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 15 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 15 m, 0.53 mm, 2.00 µm

J&W DB-WAXetr GC Column, 25 m, 0.20 mm, 0.40 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 30 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W DB-WAXetr GC Column, 30 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 30 m, 0.25 mm, 0.50 µm, 5 inch cage

J&W DB-WAXetr GC Column, 30 m, 0.25 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 30 m, 0.32 mm, 0.25 µm, 5 in cage

J&W DB-WAXetr GC Column, 30 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 30 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 30 m, 0.32 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 30 m, 0.53 mm, 1.00 µm

J&W DB-WAXetr GC Column, 30 m, 0.53 mm, 1.00 µm, 5 inch cage

J&W DB-WAXetr GC Column, 30 m, 0.53 mm, 1.50 µm

J&W DB-WAXetr GC Column, 30 m, 0.53 mm, 2.00 µm

J&W DB-WAXetr GC Column, 30 m, 0.53 mm, 2.00 µm, 5 inch cage

J&W DB-WAXetr GC Column, 50 m, 0.32 mm, 1.00 µm, 5 inch cage

J&W DB-WAXetr GC Column, 50 m, 0.32 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 60 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W DB-WAXetr GC Column, 60 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 60 m, 0.25 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 60 m, 0.32 mm, 0.25 µme, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W DB-WAXetr GC Column, 60 m, 0.32 mm, 0.50 µm

J&W DB-WAXetr GC Column, 60 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 60 m, 0.32 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W DB-WAXetr GC Column, 60 m, 0.53 mm, 1.00 µm

Adapter PEEK-ESD, 1/4-28 female to coned 10-32

Adapter, PEEK, female 1/4-28 to male 10-32

Adapter, PEEK, to switch 1/4-28 to 10-32

Adapter, stainless steel, 10-32 coned female to 1/4-28 flat bottom male

Barbed Y-connector, PP, for 3/16 in ID tubing, 10/pk

Fitting Union Bio compatible, MP35N 10-32 coned. zero dead volume

InfinityLab thread adapter, GL45(M) to GPI 38(F), PTFE. For InfinityLab Stay Safe cap

InfinityLab thread adaptor, GL45(M) to GL40(F), PTFE. For InfinityLab Stay Safe cap

T-connector, PEEK, for 1/16 inch od tubing. swept volume: 0.57µL

Union, 1/4-28 flat-bottom ESD. 0.8mm ID

Zero dead volume union, stainless steel, female M4

Zero-dead-volume union, bio-inert, stainless steel with PEEK insert

Zero-dead-volume union, PEEK, with two fittings

Zero-dead-volume union, stainless steel, for prep LC, without fittings. 10-32 coned female ports, 0.6mm ID

Zero-dead-volume union, stainless steel, universal, without fittings. 10-32 coned female, ID 0.3mm

Zero-dead-volume union, stainless steel, with two fittings

Zero-dead-volume union, stainless steel, without fittings. true ZDV union, use with fused-silica PEEK capillaries

Zero-dead-volume union, PEEK, for 1/8 inch (3.2mm) OD tubing

InfinityLab Quick Connect assembly stainless steel 0.25 x 105 mm, with female connector

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.075 x 105 mm capillary and Quick Turn fitting

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.075 x 105mm capillary

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.075 x 280 mm capillary

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.12 x 105mm capillary

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.12 x 150mm capillary

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.12 x 220 mm capillary

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.12 x 280mm capillary

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.17 x 105mm capillary

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.17 x 150 mm capillary

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.17 x 220 mm capillary

InfinityLab Quick Connect Fitting assembly with pre-fixed 0.17 x 280 mm capillary

InfinityLab Quick Connect Fitting assembly with prefixed 0.075 x 150mm capillary

InfinityLab Quick Connect Fitting assembly with prefixed 0.075 x 220 mm capillary

Quick Connect capillary PEEK/stainless steel 0.17 x 280 mm. bio-inert capillary for use with Quick Connect Fitting, comes without fittings

Quick Connect capillary PEEK/stainless steel 0.17 x 500 mm

Quick Connect capillary stainless steel 0.075 x 105 mm

Quick Connect capillary stainless steel 0.075 x 150 mm

Quick connect capillary MP35N 0.075 x 105mm. for use with Quick Connect Fitting

Quick Connect capillary stainless steel 0.075 x 220 mm

Quick Connect Capillary MP35N 0.075 x 150mm. for use with Quick Connect Fitting

Quick Connect capillary stainless steel 0.075 x 250 mm

Quick Connect Capillary MP35N 0.075 x 280mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.075 x 280 mm

Front ferrule, for InfinityLab Quick Connect and Quick Turn fitting

Quick Connect Capillary MP35N 0.12 x 105mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.12 x 105 mm

Quick Connect Capillary MP35N 0.12 x 150mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.12 x 120mm

Quick Connect Capillary MP35N 0.12 x 220mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.12 x 150 mm

Quick Connect Capillary MP35N 0.12 x 280mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.12 x 150 mm M4 ps

Quick Connect Capillary MP35N 0.12 x 400mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.12 x 220 mm

Quick Connect Capillary MP35N 0.12 x 500mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.12 x 280 mm

Quick Connect Capillary MP35N 0.17 x 105mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.12 x 340 mm M4

Quick Connect Capillary MP35N 0.17 x 150mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.12 x 400 mm

Quick Connect Capillary MP35N 0.17 x 220mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.12 x 500 mm

Quick Connect Capillary MP35N 0.17 x 280mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.17 x 105 mm

Quick Connect Capillary MP35N 0.17 x 500mm. for use with Quick Connect Fitting.

Quick Connect capillary stainless steel 0.17 x 120 mm

Quick Connect capillary stainless steel 0.17 x 150 mm

Quick Connect capillary stainless steel 0.17 x 150 mm M4

Quick Connect capillary stainless steel 0.17 x 220 mm

Quick Connect capillary stainless steel 0.17 x 280 mm

InfinityLab Quick Connect LC fitting

Quick Connect capillary stainless steel 0.17 x 500 mm

InfinityLab Quick Turn LC fitting

Quick Connect capillary stainless steel 0.25 x 105 mm, with female connector

Quick Connect capillary stainless steel 0.25 x 150 mm

Quick Connect capillary stainless steel 0.25 x 400 mm

Quick Turn Capillary MP35N 0.075 x 105mm

Quick Turn Capillary MP35N 0.075 x 150mm

Quick Turn Capillary MP35N 0.075 x 250mm

Quick Turn Capillary MP35N 0.075 x 500mm

Quick Turn Capillary MP35N 0.12 x 105mm

Quick Turn Capillary MP35N 0.12 x 150mm

Quick Turn Capillary MP35N 0.12 x 200mm

Quick Turn Capillary MP35N 0.12 x 280mm

Quick Turn Capillary MP35N 0.12 x 400mm

Quick Turn Capillary MP35N 0.12 x 500mm

Quick Turn Capillary MP35N 0.17 x 105mm

Quick Turn Capillary MP35N 0.17 x 150mm

Quick Turn Capillary MP35N 0.17 x 200mm

Quick Turn Capillary MP35N 0.17 x 280mm

Quick Turn Capillary MP35N 0.17 x 400mm

Quick Turn Capillary MP35N 0.17 x 500mm

Quick Turn Capillary MP35N 0.17 x 700 mm

Quick Turn Capillary stainless steel 0.17 x 150 mm M4 ps

Quick Turn capillary stainless steel 0.075 x 105 mm

Quick Turn capillary stainless steel 0.075 x 150 mm

Quick Turn capillary stainless steel 0.075 x 250mm

Quick Turn capillary stainless steel 0.075 x 500 mm long socket

Quick Turn capillary stainless steel 0.12 x 105 mm

Quick Turn capillary stainless steel 0.12 x 150 mm

Quick Turn Capillary Stainless Steel 0.12 x 150 mm No/M4 -/ps

Quick Turn capillary stainless steel 0.12 x 180 mm

Quick Turn capillary stainless steel 0.12 x 200 mm

Quick Turn capillary stainless steel 0.12 x 280 mm

Quick Turn capillary stainless steel 0.12 x 500 mm

Quick Turn capillary stainless steel 0.17 x 105 mm

Quick Turn capillary stainless steel 0.17 x 150 mm

Quick Turn capillary stainless steel 0.17 x 180 mm

Quick Turn capillary stainless steel 0.17 x 200 mm

Quick Turn capillary stainless steel 0.17 x 280 mm

Quick Turn capillary stainless steel 0.17 x 380 mm

Quick Turn capillary stainless steel 0.17 x 400 mm

Quick Turn capillary stainless steel 0.17 x 500 mm

Quick Turn capillary stainless steel 0.17 x 700 mm

Quick Turn capillary stainless steel 0.25 x 105 mm with female connector

Quick Turn capillary stainless steel 0.25 x 150 mm

Quick Turn capillary stainless steel 0.25 x 400 mm

J&W HP-INNOWax GC column, 20 m, 0.18 mm, 0.18 µm, 5 inch cage

J&W HP-INNOWax GC column, 30 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W HP-INNOWax GC column, 30 m, 0.25 mm, 0.25 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W HP-INNOWax GC column, 30 m, 0.25 mm, 0.50 µm, 5 inch cage

J&W HP-INNOWax GC column, 30 m, 0.32 mm, 0.25 µm, 4 inch cage

J&W HP-INNOWax GC column, 30 m, 0.32 mm, 0.25 µm, 5 inch cage

J&W HP-INNOWax GC column, 30 m, 0.32 mm, 0.50 µm, 4 inch cage

J&W HP-INNOWax GC column, 30 m, 0.32 mm, 0.50 µm, 5 inch cage

J&W HP-INNOWax GC column, 30 m, 0.53 mm, 1.00 µm, 5 inch cage

J&W HP-INNOWax GC column, 60 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W HP-INNOWax GC column, 60 m, 0.32 mm, 0.50 µm, 5 inch cage

J&W HP-INNOWax Intuvo GC column module, 30 m, 0.25 mm, 0.25 µm. (compatible only with the Intuvo 9000 GC System)

J&W HP-INNOWax Intuvo GC column module, 30 m, 0.32 mm, 0.25 µm. (compatible only with the Intuvo 9000 GC System)

J&W HP-INNOWax Intuvo GC column module, 30 m, 0.32 mm, 0.5 µm. (compatible only with the Intuvo 9000 GC System)

J&W HP-INNOWax Intuvo GC column module, 60 m, 0.32 mm, 0.5 µm. (compatible only with the Intuvo 9000 GC System)

J&W HP-INNOWax, 15 m, 0.25 mm, 0.25 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 15 m, 0.25 mm, 0.50 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 15 m, 0.32 mm, 0.25 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 15 m, 0.53 mm, 1.00 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 20 m, 0.18 mm, 0.18 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 25 m, 0.20 mm, 0.20 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 30 m, 0.25 mm, 0.15 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 30 m, 0.25 mm, 0.25 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 30 m, 0.25 mm, 0.50 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 30 m, 0.32 mm, 0.15 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 30 m, 0.32 mm, 0.25 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 30 m, 0.32 mm, 0.50 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 30 m, 0.53 mm, 1.00 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 40 m, 0.18 mm, 0.18 µm, 5 inch cage

J&W HP-INNOWax, 40 m, 0.18 mm, 0.18 µm, 7 inch cage

J&W HP-INNOWax, 40 m, 0.18 mm, 0.3 µm, 5 inch cage

J&W HP-INNOWax, 40 m, 0.18 mm, 0.3 µm, 7 inch cage

J&W HP-INNOWax, 5 m, 0.25 mm, 0.15 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W HP-INNOWax, 50 m, 0.20 mm, 0.20 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 50 m, 0.20 mm, 0.40 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 60 m, 0.25 mm, 0.25 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 60 m, 0.25 mm, 0.50 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 60 m, 0.25 mm, 0.50 µm, 5 inch cage

J&W HP-INNOWax, 60 m, 0.32 mm, 0.25 µm, GC column, 5 inch cage

J&W HP-INNOWax, 60 m, 0.32 mm, 0.25 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 60 m, 0.32 mm, 0.50 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W HP-INNOWax, 60 m, 0.53 mm, 1.0 µm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

InfinityLab Acetonitrile, HPLC Gradient Grade, 1 x 2.5 Liters. Contains 2.5 L bottle of HPLC gradient grade acetonitrile, 1/pack.

InfinityLab Acetonitrile, HPLC Gradient Grade, 1 x 4 Liters. Contains 4 L bottle of HPLC gradient grade acetonitrile, 1/pack.

InfinityLab Acetonitrile, HPLC Gradient Grade, 4 x 2.5 Liters. Contains 2.5 L bottles of HPLC gradient grade acetonitrile, 4/pack.

InfinityLab Acetonitrile, HPLC Gradient Grade, 4 x 4 Liters. Contains 4 L bottles of HPLC gradient grade acetonitrile, 4/pack.

InfinityLab Methanol, HPLC Gradient Grade, 1 x 2.5 Liters. Contains 2.5 L bottles of HPLC gradient grade methanol, 1/pack.

InfinityLab Methanol, HPLC Gradient Grade, 1 x 4 Liters. Contains 4 L bottles of HPLC gradient grade methanol, 1/pack.

InfinityLab Methanol, HPLC Gradient Grade, 4 x 2.5 Liters. Contains 2.5 L bottles of HPLC gradient grade methanol, 4/pack.

InfinityLab Methanol, HPLC Gradient Grade, 4 x 4 Liters. Contains 4 L bottles of HPLC gradient grade methanol, 4/pack.

InfinityLab Water, HPLC Gradient Grade, 1 x 2.5 Liters. Contains 2.5 L bottle of HPLC gradient grade water, 1/pack.

InfinityLab Water, HPLC Gradient Grade, 1 x 4 Liters. Contains 4 L bottles of HPLC gradient grade water, 1/pk.

InfinityLab Water, HPLC Gradient Grade, 4 x 2.5 Liters. Contains 2.5 L bottles of HPLC gradient grade water, 4/pack.

InfinityLab Water, HPLC Gradient Grade, 4 x 4 Liters. Contains 4 L bottles of HPLC gradient grade water, 4/pack.

InfinityLab Acetonitrile for LC/MS, 1 x 1 Liters . Contains LC/MS grade acetonitrile in 1 L bottles, 1/pack. Only available in America, Europe and India.

InfinityLab Acetonitrile for LC/MS, 6 x 1 Liters . Contains LC/MS grade acetonitrile in 1 L bottles, 6/pack.

InfinityLab Methanol for LC/MS, 1 x 1 Liter. Contains LC/MS grade methanol in 1 L bottles, 1/pack.

InfinityLab Methanol for LC/MS, 6 x 1 Liters. Contains LC/MS grade methanol in 1 L bottles, 6/pack.

InfinityLab Water for LC/MS, 1 x 1 Liter. Contains LC/MS grade water in 1 L bottles, 1/pack.

InfinityLab Water for LC/MS, 6 x 1 Liters. LC/MS grade water in 1 L bottles, 6/pack.

J&W CP-Wax 52 CB GC Column, 10 m, 0.53 mm, 1.00 μm, UltiMetal, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC s

J&W CP-Wax 52 CB GC column, 25 m, 0.25 mm, 0.20 μm, 5 inch cage

J&W CP-Wax 52 CB GC column, 25 m, 0.25 mm, 1.20 μm, 5 inch cage

J&W CP-Wax 52 CB GC column, 25 m, 0.53 mm, 2.00 μm, 5 inch cage

J&W CP-Wax 52 CB GC Column, 25 m, 0.53 mm, 2.00 μm, UltiMetal, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC s

J&W CP-Wax 52 CB GC column, 30 m, 0.25 mm, 0.25 μm, 5 inch cage

J&W CP-Wax 52 CB GC column, 50 m, 0.25 mm, 0.20 μm, 5 inch cage

J&W CP-Wax 52 CB GC column, 50 m, 0.32 mm, 1.20 μm, 5 inch cage

J&W CP-Wax 52 CB GC Column, 50 m, 0.53 mm, 1.00 μm, UltiMetal, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC s

J&W CP-Wax 52 CB GC Column, 50 m, 0.53 mm, 2.00 μm, UltiMetal, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC s

J&W CP-Wax 52 CB GC column, 60 m, 0.32 mm, 1.20 μm, 5 inch cage

J&W CP-Wax 52 CB, 10 m, 0.10 mm, 0.10 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 10 m, 0.10 mm, 0.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 10 m, 0.25 mm, 0.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 10 m, 0.53 mm, 1.00 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 10 m, 0.53 mm, 2.00 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 100 m, 0.53 mm, 2.00 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems an

J&W CP-Wax 52 CB, 15 m, 0.15 mm, 0.12 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 15 m, 0.25 mm, 0.25 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 15 m, 0.32 mm, 0.25 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 15 m, 0.32 mm, 0.50 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 15 m, 0.53 mm, 1.00 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 20 m, 0.10 mm, 0.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 25 m, 0.15 mm, 0.25 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 25 m, 0.25 mm, 0.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 25 m, 0.25 mm, 1.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 25 m, 0.32 mm, 0.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 25 m, 0.32 mm, 0.40 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 25 m, 0.32 mm, 1.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 25 m, 0.53 mm, 1.00 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 25 m, 0.53 mm, 2.00 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 30 m, 0.20 mm, 0.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 30 m, 0.25 mm, 0.15 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 30 m, 0.25 mm, 0.25 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 30 m, 0.25 mm, 0.50 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 30 m, 0.32 mm, 0.15 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 30 m, 0.32 mm, 0.25 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 30 m, 0.32 mm, 0.50 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 30 m, 0.32 mm, 1.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 30 m, 0.53 mm, 1.00 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 50 m, 0.20 mm, 0.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 50 m, 0.25 mm, 0.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 50 m, 0.32 mm, 0.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 50 m, 0.32 mm, 0.40 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 50 m, 0.32 mm, 1.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 50 m, 0.53 mm, 1.00 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 50 m, 0.53 mm, 2.00 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 60 m, 0.25 mm, 0.25 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 60 m, 0.25 mm, 0.50 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 60 m, 0.32 mm, 0.25 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 60 m, 0.32 mm, 0.50 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 60 m, 0.32 mm, 1.20 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

J&W CP-Wax 52 CB, 60 m, 0.53 mm, 1.00 μm, GC column, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and

Nuts, polyphenylene sulfilde (PPS), for 1/8 inch (3.2mm) OD tubing, 1/4-28 thread, 10/pk

Replacement vacuum chamber

Syringe adapter. For G1322A

Syringes, disposable, 20 mL, polypropylene, 10/pk.

Tefzel ferrule and stainless steel lock ring, 1/8 inch, 10/pk. for vacuum degasser

Tubing kit for vacuum chamber replacement kit (5067-5383), for G1379B

Tubing kit, for Agilent G1379A micro-vacuum degasser

Tubing kit, for Agilent G1379B micro-vacuum degasser

Tubing Kit, degasser to pump, 4/pk, 30 cm pieces of tubing with screws and bushings.

Vacuum tubing kit, for Agilent G1379A Degasser

PTFE Solvent tubing 5 m, 1.5 mm id, 3 mm od

Zero-dead-volume union, polypropylene, 1/4-28 thread, 10/pk

Vacuum chamber replacement kit.

Vacuum chamber replacement kit, for G1379A Micro Volume Degasser

J&W HP-FFAP GC Column, 10 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W HP-FFAP GC Column, 15 m, 0.53 mm, 1.00 µm, 5 inch cage

J&W HP-FFAP GC Column, 15 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W HP-FFAP GC Column, 25 m, 0.20 mm, 0.33 µm, 5 inch cage

J&W HP-FFAP GC Column, 25 m, 0.20 mm, 0.33 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W HP-FFAP GC Column, 25 m, 0.32 mm, 0.50 µm, 5 inch cage

J&W HP-FFAP GC Column, 25 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W HP-FFAP GC Column, 30 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W HP-FFAP GC Column, 30 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W HP-FFAP GC Column, 30 m, 0.25 mm, 0.25 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W HP-FFAP GC Column, 30 m, 0.32 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W HP-FFAP GC Column, 30 m, 0.53 mm, 1.00 µm, 5 inch cage

J&W HP-FFAP GC Column, 30 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W HP-FFAP GC Column, 50 m, 0.20 mm, 0.33 µm, 5 inch cage

J&W HP-FFAP GC Column, 50 m, 0.20 mm, 0.33 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W HP-FFAP GC Column, 50 m, 0.32 mm, 0.50 µm, 5 inch cage

J&W HP-FFAP GC Column, 50 m, 0.32 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n