Расходные материалы для хроматографии

J&W GS-Q GC Column, 10 m, 0.53 mm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Agilent G

J&W GS-Q GC Column, 15 m, 0.53 mm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Agilent G

J&W GS-Q GC Column, 25 m, 0.53 mm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Agilent G

J&W GS-Q GC Column, 30 m, 0.32 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-

J&W GS-Q GC Column, 30 m, 0.32 mm, 5 inch cage

J&W GS-Q GC Column, 30 m, 0.53 mm, 5 inch cage

J&W GS-Q GC Column, 30 m, 0.53 mm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Agilent G

Cap kit 2 pos/10 port micro valve, 600 bar. for use in G1316C, includes capillaries with M4 fittings to connect to micro ports

Capillary kit 0.12 mm id, for the 6-Column Selector valve, for use with the G1316C

Capillary kit, 0.12 mm id, for dual column selection in the internal column compartment of the 1200 Infinity vialsampler. Includes 2 Quick Connect and 2 Quick Turn fittings; capill

Capillary kit, 0.12 mm id, for 4-column Selector valve. with Quick Connect heat exchangers, for use with G7116A/B MCT

Capillary kit, 0.12 mm id, for the 6-Column Selector valve, for use with the G7116B MCT

Capillary kit, 0.12 mm id, stainless steel, with 1290 low dispersion double heat exchanger, for 2-pos, 6-port valve. for use in the Thermostatted Column Compartment (G1316C)

Capillary kit, 0.12 mm id, stainless steel, with 1290 low dispersion double heat exchanger, for 2-position, 10-port valve. for use in the Thermostatted Column Compartment (G1316C)

Capillary kit, 0.12 mm id, stainless steel, with 1290 quick connect heat exchanger, for 2-pos, 10-port valve. for use in the Multi Column Compartment (G7116A/B)

Capillary kit, 0.17 mm id, for dual column selection in the internal column compartment of the 1200 Infinity vialsampler. Includes 2 Quick Connect and 2 Quick Turn fittings; capill

Capillary kit, 0.12 mm, for 8-column selector valve

Capillary kit, 0.17 mm id, bioinert, for 4-column selection valve, 600 bar

Capillary kit, 0.17mm id for use with 2 pos / 10 port valve. including Quick Connect Heatexchanger

Capillary kit, 0.17 mm id, for 2 position / 6 port valve, including Quick Connect heat exchangers, for use with G7116A/B MCT

Capillary kit, 0.17 mm id, for 2-position/6-port valve, bio-inert, 600 bar

Capillary kit, for 2 position-10 port Bio-inert valve

Capillary kit, 0.17 mm ID, G1316C 2/10 valve

Capillary kit, 0.17 mm id, stainless steel, 6-column selector valve. for use in the Thermostatted Column Compartment (G1316C)

Capillary kit, 0.17mm id, for 4-column selector valve

Capillary kit. Includes two 0.17 x 180 mm 1/16 inch male to male capillaries and three 0.17 x 90 mm 1/16 inch male to male capillaries, used with 1100, 1200 and 1260 Infinity liqui

Capillary tubing kit, 0.12 mm id, for 1200 LC System

Capillary tubing kit, 0.12 mm id, stainless steel, with 1290 quick connect heat exchanger, for 2-position, 6-port valve. for use in the Multi Column Compartment (G7116A/B)

Rapid Resolution HT Capillary Kit

Solvent tubing kit for 4-channel solvent selection

J&W HP-PLOT Al2O3 KCI GC Column, 30 m, 0.25 mm, 5.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W HP-PLOT Al2O3 KCI GC Column, 30 m, 0.25 mm, 5.00 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W HP-PLOT Al2O3 KCI GC Column, 30 m, 0.53 mm, 15.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W HP-PLOT Al2O3 KCI GC Column, 30 m, 0.53 mm, 15.00 μm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W HP-PLOT Al2O3 KCI GC Column, 50 m, 0.32 mm, 8.00 µm, 5 inch cage

J&W HP-PLOT Al2O3 KCI GC Column, 50 m, 0.32 mm, 8.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W HP-PLOT Al2O3 KCI GC Column, 50 m, 0.53 mm, 15.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W HP-PLOT Al2O3 KCl GC Column, 50 m, 0.53 mm, 15.00 μm, 5 inch cage

J&W HP-PLOT Al2O3 KCl PT, 30 m, 0.53 mm, 15 µm GC column, with two particle traps (front and rear)

J&W HP-PLOT Al2O3 KCl PT, 50 m, 0.53 mm, 15 µm GC column, with two particle traps (front and rear)

HP-PLOT AL2O3 M 50m,0.32mm, 8um with PT

J&W HP PLOT Al2O3 M 50 m, 0.53 mm, 15 µm, 5 inch cage

J&W HP-PLOT Al2O3 M GC Column, 30 m, 0.53 mm, 15.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W HP-PLOT Al2O3 M GC Column, 50 m, 0.32 mm, 8.00 µm, 5 inch cage

J&W HP-PLOT Al2O3 M GC Column, 50 m, 0.32 mm, 8.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems a

J&W HP-PLOT Al2O3 M GC Column, 50 m, 0.53 mm, 15.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W HP-PLOT Al2O3 M PT, 50 m, 0.53 mm, 15 µm GC column, , with two particle traps (front and rear)

1260 base plate column organizer

Agilent Thermal Equilibration Device. Allows for faster equilibration of columns inside the Multicolumn Thermostat suited for short columns (1ea; left/ right) or long columns (2ea;

Belt, long, for column holder L, rubber belt. for G7163-60002

Colored clip kit, contains 24 clips, 3 of each of 8 different colors, numbered from 1 to 8. These clips can be used for number and color coding of columns, fittings and capillaries

Column Clamp 6/pk

Column holder clamp for columns 9.4–30 mm ID. for 1290 Infinity II column compartment G7163B and 1260 Infinity II column organizer G9328A

Column holder clamp, 2/pk. For use in 1290 Infinity II Multicolumn Thermostat (MCT, G7116B) 1260 Infinity II Multicolumn Thermostat (MCT, G7116A) and in integrated column compartme

Column holder clamp, for columns 30–50 mm ID. for 1290 Infinity II column compartment G7163B

Column holder clips (lamella type)

Column holder for u-LC columns

Thermal column insulation enclosure kit

Column identification RFID tag, 3/pk

Column clip set, eight colors

InfinityLab column identification tag assembly

TCC clamps for 20 mm id columns. 4 clamps for 20 mm (approximate) id preparative columns, for use in SECcurity thermostatted column compartments TCC6000, TCC6500, TCC7000, or G7886

TCC clamps for 4 mm id columns. 8 clamps for 4 mm (approximate) id columns, for use in SECcurity thermostatted column compartments TCC6000, TCC6500, TCC7000, or G7886A

TCC clamps for 8 mm id columns. 8 clamps for 8 mm (approximate) id columns, for use in SECcurity thermostatted column compartments TCC6000, TCC6500, TCC7000, or G7886A

Capillary stainless steel 0.12 x 70 mm S/S ns/ns

Capillary stainless steel 0.17 x 90 mm S/S ns/ns

J&W HP-PLOT Al2O3 S GC Column, 15 m, 0.53 mm, 15.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W HP-PLOT Al2O3 S GC Column, 25 m, 0.32 mm, 8.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems a

J&W HP-PLOT Al2O3 S GC Column, 25 m, 0.32 mm, 8.00 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W HP-PLOT Al2O3 S GC Column, 30 m, 0.25 mm, 5.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems a

J&W HP-PLOT Al2O3 S GC Column, 30 m, 0.53 mm, 15.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W HP-PLOT Al2O3 S GC Column, 50 m, 0.32 mm, 8.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems a

J&W HP-PLOT Al2O3 S GC Column, 50 m, 0.53 mm, 15.00 μm, 5 inch cage

J&W HP-PLOT Al2O3 S GC Column, 50 m, 0.53 mm, 15.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W HP-PLOT Al2O3 S PT, 25 m, 0.32 mm, 8 µm GC column, with two particle traps (front and rear)

J&W HP-PLOT Al2O3 S PT, 30 m, 0.53 mm, 15 µm GC column, with two particle traps (front and rear)

J&W HP-PLOT Al2O3 S PT, 50 m, 0.32 mm, 8 µm GC column, with two particle traps (front and rear)

J&W HP-PLOT Al2O3 S PT, 50 m, 0.53 mm, 15 µm GC column, with two particle traps (front and rear)

Carrier for heat exchanger TCC SL. L-shape

Heat exchanger / Cooler, 1.5 µL

Quick Connect Heat Exchanger 1290 Bio Ultra Low Dispersion

Heat exchanger for Agilent 1290 Series LC, long, down. L-shape

Quick-Connect Heat-Exchanger 1290 Bio High Flow

Heat exchanger, high temperature, 1.6 µL, 0.12 mm id, "Left". L-shape

Quick-Connect Heat-Exchanger 1290 Bio Standard Flow

Heat exchanger, high temperature, 1.6 µL, 0.12 mm id, "Right". L-shape

Heat exchanger, PEEK, stainless-steel clad, 0.17 x 500 mm, 2 UHP-FF fittings, mounting tool, union, bio-inert

InfinityLab bio-inert Quick-Connect heat exchanger, with fittings, for multicolumn thermostat (G7116A/B). Compatible for use with Quick Connect fitting

InfinityLab bio-inert Quick-Connect heat exchanger, without fittings, for multicolumn thermostat (G7116A/B)

InfinityLab Quick-Connect heat exchanger, high flow. 0.12mm ID, 3.0µL

InfinityLab Quick-Connect heat exchanger, large ID for use with G7116A/B MCT. 0.17mm ID, 3µL

InfinityLab Quick-Connect heat exchanger, large ID, high flow. 0.17mm ID, 6µL

InfinityLab Quick-Connect heat exchanger, standard. 0.12mm ID, 1.6µL

InfinityLab Quick-Connect heat exchanger, ultralow dispersion. 0.075mm ID, 1µL

Low dispersion heat exchanger double kit . for Agilent 1290 Infinity Thermostatted Column Compartment (G1316C)

Low dispersion kit, for Agilent 1290 Infinity II LC

J&W HP-PLOT Molesieve GC Column, 15 m, 0.32 mm, 25.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W HP-PLOT Molesieve GC Column, 15 m, 0.53 mm, 25.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W HP-PLOT Molesieve GC Column, 15 m, 0.53 mm, 50.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W HP-PLOT Molesieve GC Column, 30 m, 0.32 mm, 12.00 µm, 5 inch cage

J&W HP-PLOT Molesieve GC Column, 30 m, 0.32 mm, 12.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W HP-PLOT Molesieve GC Column, 30 m, 0.32 mm, 25.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W HP-PLOT Molesieve GC Column, 30 m, 0.32 mm, 25.00 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W HP-PLOT Molesieve GC Column, 30 m, 0.53 mm, 25.00 µm, 5 inch cage

J&W HP-PLOT Molesieve GC Column, 30 m, 0.53 mm, 25.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W HP-PLOT Molesieve GC Column, 30 m, 0.53 mm, 50.00 μm, 5 inch cage

J&W HP-PLOT Molesieve GC Column, 30 m, 0.53 mm, 50.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W HP-PLOT Molesieve GC Column, 30 m, 0.53 mm, 50.00 μm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

Capillary stainless steel 0.12 x 200 mm E/U ps/ps. Outlet capillary for DAD high pressure flow cell (6mm, 1.7µL, 400bar)

DAD heat exchanger capillary, 310 x 0.17 mm. Special assembly capillary fixed to heat exchanger plate of DAD/MWD flow cell.

External Leak Sensor Assembly. 3m cable length, use with ERI Remote/Leak Module or prep sampler/collector (G7158/G7159) and pump (G7161) module

Fitting, 1/4-28, for ESD-PEEK tubing with 1.6 mm OD, 6/pk

Fitting, 1/4-28, for ESD-PEEK tubing with 2.0 mm OD, 6/pk

Inlet tubing w/heat exchanger 0.12mm id. Special assembly capillary fixed to heat exchanger plate of DAD/MWD flow cell.

Outlet capillary stainless steel 0.17 x 210 mm E/U ps/ps. Special capillary for DAD/MWD flow cell outlet connection.

DAD heat exchanger capillary 310 x 0.12mm. Special assembly capillary fixed to heat exchanger plate of DAD/MWD flow cell.

Inlet tubing w/heat exchanger, 0.17 mm id. Special assembly capillary fixed to heat exchanger plate of DAD/MWD flow cell.

Capillary stainless steel 0.17 x 380 mm S/S ps/ns

J&W HP-PLOT Q GC Column, 15 m, 0.32 mm, 20.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W HP-PLOT Q GC Column, 15 m, 0.32 mm, 20.00 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W HP-PLOT Q GC Column, 15 m, 0.53 mm, 40.00 µm, 5 inch cage

J&W HP-PLOT Q GC Column, 15 m, 0.53 mm, 40.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W HP-PLOT Q GC Column, 30 m, 0.32 mm, 20.00 µm, 5 inch cage

J&W HP-PLOT Q GC Column, 30 m, 0.32 mm, 20.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W HP-PLOT Q GC Column, 30 m, 0.32 mm, 20.00 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W HP-PLOT Q GC Column, 30 m, 0.53 mm, 40.00 µm, 5 inch cage

J&W HP-PLOT Q GC Column, 30 m, 0.53 mm, 40.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W HP-PLOT Q GC Column, 30 m, 0.53 mm, 40.00 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

Bio VWD repair kit for micro flow cell

Window Kit for Bio VWD Standard Flow Cell. includes windows and gaskets, use with Flow Cell G1314-60188

J&W HP-PLOT U GC Column, 15 m, 0.53 mm, 20.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W HP-PLOT U GC Column, 30 m, 0.32 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W HP-PLOT U GC Column, 30 m, 0.32 mm, 10.00 μm,, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W HP-PLOT U GC Column, 30 m, 0.53 mm, 20.00 µm, 5 inch cage

J&W HP-PLOT U GC Column, 30 m, 0.53 mm, 20.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

Air adapter kit, for G4260B and G4261B evaporative light scattering detectors.

Analog output cable, used with 1260 and 1290 Infinity liquid chomoatography systems,

API-ES nebulizer needle

Auto zero cable, used with 1260 Infinity liquid chromatography evaporative light scattering detector systems, model G4218A

Blank nut, 22 mm diameter. for use with nubulization chamber of the G4218A ELS detector

Blank nut, 13 mm diameter. for use with nubulization chamber of the G4218A ELS detector

Caffeine standard, 250 µg/mL caffeine in water, 3 ampoules with 1 mL content

ELDS gas inlet plug, used with 1260 and 1290 Infinity liquid chomoatography systems, models G4260A, G4260B, G4261A, and G4261B

Exhaust tube, for Agilent Evaporative Light Scattering Detectors G4260B/G4261B

External event cable, used with 1260 Infinity liquid chromatography evaporative light scattering detector systems

Front panel shield window, used with 1260 Infinity liquid chromatography evaporative light scattering detector systems, model G4218A

Gas inlet assembly, used with 1260 and 1290 Infinity liquid chomoatography systems, models G4260A, G4260B, G4261A, and G4261B

Gas inlet tube, 6 mm, used with 1260 Infinity liquid chromatography evaporative light scattering detector systems, model G4218A

Gas regulator with 0.01 µm filter and manometer

Gas tube fitting, 6 mm diameter, used with 1260 Infinity liquid chromatography evaporative light scattering detector systems, model G4218A

Injection trigger cable, used with 1260 and 1290 liquid chromotography systems

Mass flow controller, used with 1260 and 1290 Infinity liquid chomoatography systems, models G4260A, G4260B, G4261A, and G4261B

Capillary kit, for Agilent Online-SPE Starter Set G4742A

PL-ELS 2100 display, used with 1260 and 1290 Infinity liquid chomoatography systems, models G4260A, G4260B, G4261A, and G4261B

Power supply, 380-LC, used with 1260 and 1290 Infinity liquid chomoatography systems, models G4260A, G4260B, G4261A, and G4261B

Remote start cable, used with 1260 and 1290 Infinity liquid chomoatography systems, models G4260A, G4260B, G4261A, and G4261B

Replacement black exhaust tube, 2.5 m for use with the G4218A ELS detector

Replacement cartridge, 0.01 µm for gas regulator for use with the G4218A ELS detector

Replacement drain tube with stainless steel fitting for use with the G4218A ELS detector

Replacement glass nebulization chamber for the G4218A ELS detector

Replacement pneumatic tube with stainless steel fitting and gas check valve for use with nebulizer of the G4218A ELS detector

Replacement RRLC nebulizer for G4218A ELS detector

Replacement semi micro flow nebulizer for the G4218A ELS detector

Replacement standard flow nebulizer for the G4218A ELS detector

RS232 communication cable, used with 1260 and 1290 Infinity liquid chomoatography systems, models G4260A, G4260B, G4261A, and G4261B

Signal cable, used with 1260 Infinity liquid chromatography evaporative light scattering detector systems, model G4218A

Solvent inlet connector, 1/16 in, used with 1260 and 1290 Infinity liquid chomoatography systems, models G4260A, G4260B, G4261A, and G4261B

Trigger cable for dimension software, used with 1260 and 1290 Infinity liquid chomoatography systems, models G4260A, G4260B, G4261A, and G4261B

Splitter kit, 1 to 5 mL/min, analytical, for evaporative light scattering detector.

Splitter kit, 2 to 10 mL/min, analytical, for Agilent G4260B evaporative light scattering detector.

Splitter kit, 25 to 100 mL/min, preparative, for Agilent G4260B evaporative light scattering detector.

Splitter kit, 75 to 300 mL/min, preparative, for Agilent G4260B evaporative light scattering detector.

Splitter kit, 8 to 40 mL/min, preparative, for Agilent G4260B evaporative light scattering detector.

J&W CP-Al2O3/KCl PT, 50 m, 0.32 mm, 5 µm GC column, with two particle traps (front and rear)

J&W CP-Al2O3/KCl PT, 50 m, 0.53 mm, 10 µm GC column with two particle traps (front and rear)

J&W CP-Al2O3/Na2SO4 PT, 50 m, 0.32 mm, 5 µm GC column, with two particle traps (front and rear)

J&W CP-Al2O3/Na2SO4 PT, 50 m, 0.53 mm, 10 µm GC column, with two particle traps (front and rear)

J&W CP-Molsieve 5A PT, 25 m, 0.32 mm, 30 µm GC column, with two particle traps (front and rear)

J&W HP-PLOT U PT GC Column, 30 m, 0.53 mm, 20.00 µm, with two particle traps (front and rear)

J&W CP-Molsieve 5A PT, 25 m, 0.53 mm, 50 µm GC column, with two particle traps (front and rear)

J&W CP-Molsieve 5A PT, 30 m, 0.32 mm, 10 µm GC column, with two particle traps (front and rear)

J&W CP-Molsieve 5A PT, 50 m, 0.53 mm, 50 µm GC column, with two particle traps (front and rear)

J&W GS-Alumina KCl PT, 50 m, 0.53 mm, GC column, with two particle traps (front and rear)

J&W HP-PLOT Al2O3 KCl PT, 50 m, 0.32 mm, 8 µm GC column, with two particle traps (front and rear)

J&W GS-Alumina PT, 30 m, 0.53 mm, GC column, with two particle traps (front and rear)

J&W HP-PLOT Q PT GC Column, 15 m, 0.32 mm, 20.00 µm, with two particle traps (front and rear)

J&W GS-Alumina PT, 50 m, 0.53 mm GC column, with two particle traps (front and rear)

J&W HP-PLOT Q PT GC Column, 15 m, 0.53 mm, 40.00 µm, with two particle traps (front and rear)

J&W GS-Q PT GC Column, 30 m, 0.53 mm, with two particle traps (front and rear)

J&W HP-PLOT Q PT GC Column, 30 m, 0.32 mm, 20.00 µm, with two particle traps (front and rear)

J&W HP-PLOT Q PT GC Column, 30 m, 0.53 mm, 40.00 µm, with two particle traps (front and rear)

J&W PoraBOND Q PT GC Column, 10 m, 0.53 mm, 10.00 μm, with two particle traps (front and rear)

J&W PoraBOND Q PT GC Column, 25 m, 0.25 mm, 3.00 µm, with two particle traps (front and rear)

J&W PoraBOND Q PT GC Column, 25 m, 0.32 mm, 5.00 µm, with two particle traps (front and rear)

J&W PoraBOND Q PT GC Column, 25 m, 0.53 mm, 10.00 μm, with two particle traps (front and rear)

J&W PoraBOND Q PT GC Column, 50 m, 0.32 mm, 5.00 µm, with two particle traps (front and rear)

J&W PoraBOND Q, 5 m, 0.53 mm, 10.00 μm, GC column, with two particle traps (front and rear)

J&W PoraPLOT Q PT GC Column, 10 m, 0.32 mm, 10.00 μm, with two particle traps (front and rear)

J&W PoraPLOT Q PT GC Column, 25 m, 0.32 mm, 10.00 μm, with two particle traps (front and rear)

J&W PoraPLOT Q PT GC Column, 25 m, 0.53 mm, 20.00 µm, with two particle traps (front and rear)

J&W PoraPLOT Q-HT PT GC Column, 25 m, 0.32 mm, 10 μm, with two particle traps (front and rear)

J&W PoraPLOT U PT GC Column, 25 m, 0.53 mm, 20.00 µm, with two particle traps (front and rear)

1046 cutoff filter, 295nm

Calibration sample, glycogen, Agilent 1100 fluorescence detector G1321A, 1 g

FLD wavelength calibration kit, includes calibration sample (1g Glycogen), syringe filters 100/pk, syringe, needle, fittings, instructions

Photomultiplier, 1046A

PTFE tubing, 0.7 mm id, 1.6 mm od, 5 m

J&W PoraBOND Q GC Column, 10 m, 0.25 mm, 3.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W PoraBOND Q GC Column, 10 m, 0.32 mm, 5.00 µm, 5 inch cage

J&W PoraBOND Q GC Column, 10 m, 0.32 mm, 5.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W PoraBOND Q GC Column, 10 m, 0.53 mm, 10.00 μm, 5 inch cage

J&W PoraBOND Q GC Column, 10 m, 0.53 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraBOND Q GC Column, 25 m, 0.25 mm, 3.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W PoraBOND Q GC Column, 25 m, 0.32 mm, 5.00 µm, 5 inch cage

J&W PoraBOND Q GC Column, 25 m, 0.32 mm, 5.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W PoraBOND Q GC Column, 25 m, 0.53 mm, 10.00 μm, 5 inch cage

J&W PoraBOND Q GC Column, 25 m, 0.53 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraBOND Q GC Column, 50 m, 0.32 mm, 5.00 µm. 5 inch cage

J&W PoraBOND Q GC Column, 50 m, 0.32 mm, 5.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W PoraBOND Q GC Column, 50 m, 0.53 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraBOND Q, 25 m, 0.25 mm, 3.00 µm GC column, 5-inch cage

Back seals, 2.3 mm hole, PTFE, 12/pk. for use with DAD flow cell, standard, semi micro and bio-inert

Bio-inert max light cartridge cell, 10 mm, 1.0 uL, 60 bar. for G4212A/B

Bio-inert FLD flow cell, 8 μL, 20 bar (pH 1–12)

Bio Micro Flow Cell VWD 3mm, 2µL, RFID tag

Bio-inert max light cartridge cell, 60 mm, 4.0 uL, 60 bar. for G4212A/B

Bio Standard Flow Cell for VWD,10mm, 14µL, RFID tag

Capillary Holder Cell 0.17mm BIO

FLD cuvette kit, 8 μL, 20 bar for G1321A/B/C

Flow cell, 4 μL, 20 bar (pH 1 – 9.5 )

Flow cell, 8 μL, 20 bar (pH 1 – 9.5 ). for G1321A/B/C

Capillary stainless steel for flow cells 15 - 40 mL/min flow rates . with special fitting for flow cell connection

Capillary stainless steel for flow cells 4–8 mL/min flow rates . with special fitting for flow cell connection

Capillary stainless steel for flow cells 40–80 mL/min flow rates . with special fitting for flow cell connection

Capillary stainless steel for flow cells 80 - 200 mL/min flow rates . special fitting for flow cell connection

Cell housing for quartz prep flow cells. for G1315B/C/D; G1365B/C/D; G7115A; G7165A

Flow cell for supercritical fluid chromatography, 400 bar,. for Agilent 1260 Infinity Diode Array and Multiple Wavelength Detector (G1315C/D)

Cell seal assembly for 500 nL flow cell. for 500nL Flow Cell (p/n G1315-68724)

Flow cell spring washers, 10/pk

Cell seal assembly, 80 nL. for 80nL Flow Cell (p/n G1315-68716)

Flow cell, standard, 10 mm, 13 µL, 120 bar.

Flow cell, standard, RFID tag, 10 mm, 13 µL, 120 bar,

Front seals, 1.3 mm hole, PTFE, 12/pk. for use with DAD flow cell, standard, semi micro and bio-inert

High-pressure micro cell, 6mm, 1.7ul, 400bar. for Agilent G1315A/B, G1365A/B diode array and multiple wavelength detectors

InfinityLab bio-inert standard flow cell, with RFID tag, 10 mm, 13 µL, 120 bar. for G1315C/D, G1365C/D, G7115A, and G7165A

InfinityLab Max-Light cartridge cell, 10 mm, ultralow dispersion

InfinityLab Max-Light cartridge cell, 3.7 mm. for use with High Dynamic Range (HDR) detectors

InfinityLab Max-Light cartridge test cell

InfinityLab preparative flow cell, for MWD (G7165A) and DAD (G7115A) 0.06 mm path length.

InfinityLab preparative flow cell, for MWD (G7165A) and DAD (G7115A), 0.3 mm path length.

InfinityLab preparative flow cell, for MWD (G7165A) and DAD (G7115A), 3 mm path length.

Max-Light Cartridge Cell (10 mm, V(s) 1.0 µL.

Max-Light Cartridge Cell (60 mm, V(s) 4.0 µL).

Max-Light cartridge cell, LSS, 10 mm

Micro Flow cell 2 µL volume, 3 mm path, 120 bar max pressure.

Nanoliter Flow Cell - 80 nL, 6mm, 5bar.

Preparative flow cell quartz 0.06mm path

Preparative flow cell SS 3mm path length

Preparative flow cell, quartz 0.3mm path

Quartz window, for DAD flow cells

Semi Micro Flow cell 5 µL volume, 6 mm path, 120 bar max pressure

Semi-micro flow cell, 6mm, 5ul, 120bar.

Semi-nano flow cell kit, 10mm, 500nL, 5bar. Contains quartz flow cell with 10 mm path length and 500 nL volume and connecting capillaries, max 50 bar pressure

Outlet tubing, PTFE-ESD, 2 m length, 0.8 mm id, 1.6 mm od, with fittings (up to 100 mL/min), for VWD preparative flow cells 0.06 mm and 0.3 mm

Outlet tubing, PTFE-ESD, 2 m length, 1.0 mm id, 1.6 mm od, with fittings (for 100 - 300 mL/min), for VWD preparative flow cells 0.06 mm and 0.3 mm

Preparative flow cell for VWD, 0.06 mm path length, with RFID tag. 50 bar max pressure, for G7114A;G7114B

Preparative flow cell for VWD, 0.3 mm path length, with RFID tag. 50 bar max pressure, for G7114A;G7114B

Preparative flow cell for VWD, 3 mm path length, 2 µl cell volume, with RFID tag. 120 bar max pressure

Tubing, PTFE-ESD, 80 cm length, 0.5 mm id, 1.6 mm od, with fittings for preprative flow cell

Preparative Flow Cell Quartz 3mm for VWD

Quartz cell body, 10mm. for 500nL Flow Cell

Quartz cell body, 80 nL, 6 mm path length. for 80nL Flow Cell

Quartz body, 0.3 mm for prep flow cell

J&W CP-PoraBOND U, fused silica, 25 m, 0.32 mm, 7.00 µm

J&W CP-PoraBOND U, fused silica, 5 inch cage, 0.32 mm, 25 m, 7.00 µm

Deuterium DAD lamp. For Agilent 1315A/B and G1365A/B diode array detectors

Xenon FLD flash lamp. For Agilent G1321A/B/C & G7121A/B fluorescence detector. Exchanging this lamp requires advanced maintenance procedures. A service engineer might be needed.

InfinityLab long-life deuterium DAD/MWD lamp, with RFID tag. For Agilent diode array detectors with standard flow cell (G1315C/D, DAD of 1220 LC, G7115A) and multiple wavelength de

InfinityLab long-life deuterium lamp, 8 pin, with RFID tag. For diode array detectors with Max-Light cartridge cell (G4212A/B, G7117A/B/C) and G7100 CE

Long-life deuterium DAD lamp. For Agilent 1100/1200 Diode Array Detector

Long-life deuterium DAD/MWD lamp.

Tungsten VIS lamp. For Agilent G1315A/B/C/D, G1365A/B/C/D, G7115A UV detectors, and 8453A diode array spectrophotometer

APPI Lamp

Channel electron multiplier assembly, ceramic

Valve kit, 2 position/6 port, 400 bar

J&W PoraPLOT Q GC Column, 10 m, 0.25 mm, 8.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W PoraPLOT Q GC Column, 10 m, 0.32 mm, 10.00 μm, 5 inch cage

J&W PoraPLOT Q GC Column, 10 m, 0.32 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraPLOT Q GC Column, 10 m, 0.53 mm, 20.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraPLOT Q GC Column, 10 m, 0.53 mm, 20.00 μm, UltiMetal, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC sy

J&W PoraPLOT Q GC Column, 25 m, 0.25 mm, 8.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W PoraPLOT Q GC Column, 25 m, 0.32 mm, 10.00 μm, 5 inch cage

J&W PoraPLOT Q GC Column, 25 m, 0.32 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraPLOT Q GC Column, 25 m, 0.53 mm, 20.00 µm, 5 inch cage

J&W PoraPLOT Q GC Column, 25 m, 0.53 mm, 20.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraPLOT Q GC Column, 25 m, 0.53 mm, 20.00 μm, UltiMetal, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC sy

J&W PoraPLOT Q GC Column, 50 m, 0.32 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraPLOT Q GC Column, 50 m, 0.53 mm, 20.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

Interface Capillary

Interface Tubing Kit

Restriction capillary, used with liquid chromatography refractive index detector systems, model G1362A

Tubing kit, used with liquid chromatography refractive index detector systems, model G1362A

J&W PoraPLOT Q-HT GC Column, 10 m, 0.32 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems an

J&W PoraPLOT Q-HT GC Column, 10 m, 0.53 mm, 20.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems an

J&W PoraPLOT Q-HT GC Column, 25 m, 0.32 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems an

J&W PoraPLOT Q-HT GC Column, 25 m, 0.53 mm, 20.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems an

Capillary stainless steel 0.12 x 310 mm S/E ps/ps.

InfinityLab long-life deuterium VWD lamp, with RFID tag

Long-life deuterium VWD lamp.

PEEK inlet tubing assembly, 60cm

VWD waste tubing assembly

Gasket No. 1 KIT

Gasket No.2 KIT

High pressure flow cell, 10 mm, 14 µL for variable wavelength detector with RFID tag. for G1314B/C/E/F; G7114A/B

Micro flow cell, 3 mm, 2 µL for variable wavelength detector with RFID tag.

Micro flow cell, 5 mm, 1 µL, 40 bar.

Semi-micro flow cell, 6 mm, 5 µL for variable wavelength detector with RFID tag

Standard flow cell, 10 mm, 14 µL for variable wavelength detector with RFID tag

Capillary stainless steel 0.17 x 120 mm S/E ps/ps

J&W PoraPLOT S GC Column, 25 m, 0.53 mm, 20.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a