Расходные материалы для хроматографии

384-well plate, 0.19 mL, square wells, V shape, polypropylene, 22mm, 25/pk

96 Well Plates with glass inserts, caps, septa preassembled, 0.35 mL

96-well plate, 0.33 mL, round wells, V shape, polypropylene, 14 mm, 100/pk

96-well plate, 0.33 mL, round wells, V shape, polypropylene, 14 mm, 50/pk

96-well plate, 0.5 mL, round wells, U shape, polypropylene, 14 mm, 120/pk

96-well plate, 0.5 mL, round wells, U shape, polypropylene, 14 mm, 30/pk

96-well plate, 1.0 mL, round wells, U shape, polypropylene, 32 mm, 50/pk

96-well plate, 1.2 mL, round wells, U shape, polypropylene, 27 mm, 50/pk

96-well plate, 2.0 mL, round wells, U shape, polypropylene, 45mm, 30/pk

96-well plate, 2.2 mL, square wells, U shape, polypropylene, 41 mm, 30/pk

Glass Test Tubes, 12 x 100 mm, 250/pk

96-well sample plates. For use with Agilent 4200 TapeStation system

Glass Test Tubes, 12 x 48 mm, 100/pk

Agilent 96-well plate, 0.33 mL, round wells, V shape, PP, 14 mm, 25/pk

Glass Test Tubes, 16 x 100 mm, 250/pk

Agilent 96-well plate, 1.2 mL, round wells, U shape, polypropylene, 27 mm, 25/pk

Glass Test Tubes, 16 x 48 mm, 100/pk

Cap for 350 µL glass insert, 1000/pk. Cap for 350 µL glass insert (pn. 5065-4402), 1000/pk. This cap is not compatible with standard 2 mL vials.

Closing mats for 96 well plates, silicone 50/pk. Silicone closing mats for 96 well plates

Glass inserts, 350 µL, 1000/pk. Glass Inserts for use with wellplates such as pn 5065-4402 (not for use with vials)

Sealing mat, 384 wells, square, preslitted, silicone, 50/pk

Sealing mat, 96 wells, round, preslitted, silicone, 100/pk

Sealing mat, 96 wells, round, preslitted, silicone, 50/pk

Sealing mat, 96 wells, square, preslitted, silicone, 50/pk. Sealing

Round bottom glass test tube, 25 x 100 mm 100/pk

Round bottom glass test tube, 30 x 100 mm 100/pk

Round bottom glass test tube, 30 x 48 mm 100/pk

Test tubes, 12 x 150 mm, 11 mL, 250/pk

Test tubes, 16 x 150 mm, 21 mL, 250/pk

Test tubes, 25 x 150 mm, 55 mL, 100/pk

Test tubes, 30 x 150 mm, 78 mL, 100/pk

J&W PoraPLOT U GC Column, 10 m, 0.32 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraPLOT U GC Column, 10 m, 0.53 mm, 20.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraPLOT U GC Column, 25 m, 0.25 mm, 8.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W PoraPLOT U GC Column, 25 m, 0.32 mm, 10.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W PoraPLOT U GC Column, 25 m, 0.53 mm, 20.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

256 MB Compact Flash Card (obsolete with no replacement). no replacement

Mounting tool for flangeless nuts

Blank nut, PEEK-ST, long, finger-tight. for system diagnostic tests, maximal pressure 1300 bar

Blank nut, stainless steel, for 1/16 inch Swagelok fitting ports

Angled wrench for split/splitless septum nut

Blank nut, stainless steel, for M4 port

Bio Pump Head Mounting assistance. Pump Head Holder

Bit kit for torque wrench

Glass syringe, 1 mL, luer tip, 0.05 scale

USB Memory Stick for G4208A

Blank nut, plug, stainless steel, for 10-32 coned fitting ports. long thread fitting (SI)

Hex key, 4.0mm, 10cm long straight handle

Cable, universal data

Hex key, 2.5mm, 10cm long, straight-handle

Calibration capillary assembly. Special capillary, required for module diagnostic tests.

Syringe needle, square end point style. for G4270/71 - CTC injector

Capillary stainless steel 0.25 x 4000 mm U/U. Special capillary for prep system diagnostic tests

Ceramic scribe column cutter, 4/pk

Fraction collection remote Y-cable, 3000 mm length, for connecting the fraction collector with the MS instrument

Cleaning brush for split/splitless inlet split vent fitting, FID, collectors

LC tools, hex key kit. includes, long hex keys (1.5, 2, 2.5, 3, 4, 5 mm) and universal handle grip

Union Adjustment Tool

Compact tool kit; includes mounting tool for flangeless nut (0100-1710), tool, wrench 1/4 inch to 5/16 inch qty 2 (8710-0510), wrench open 14mm (8710-1924), wrench, 1/2 & 9/16 (872

Cutting tool, for fused silica tubing, with rotating diamond blade

Mounting tool, plastic. for QuickTurn Fitting, SW5 and 0.25 inch screws, maximum torque 0.8 Nm

Diamond blade replacement kit for CE column cutter

Ferrule removal tool

Ferrule removal tool, 0.25-0.32 mm

Shutoff valve

Ferrule removal tool, 0.53 mm

Tubing cutter blades, for cutting plastic/PEEK tubing

Ferrule, red, outer diameter 1/32 inch

Ferrule, Tefzel, yellow, 1/8 in ID, 8/pk. Flangeless Ferrule for 1/8" (3.2mm) OD tubing, 1/4-28 Flat-Bottom

Hex bit, 4 mm, 89 mm length. For maintenance of 1290 Infinity and 1290 Infinity II pumps.

Hex driver, slitted, SW-4

Hex driver, SW-5 slotted

Hex driver, SW-6,35 slotted, tool for standard capillary fittings

Hex key, 9/64 in, 15 cm, T-handle

InfinityLab system tool kit, for Infinity II LC instruments. includes hex key set, seal insert tool, hex drivers slitted, wrenches, plastic syringe, syringe adapter, blanking nut,

Injector lubricant, PTFE

Insert tool, for inserting wash seals

Magnifier, 20X

MCT Adjustment Tool

Nut driver, 7 mm

Screwdriver, green handle, star shaped

Screwdriver, Pozidriv, # 2-4 screws

Screwdriver, Pozidriv, # 5-10 screws

Screwdriver, Torx, T20

Seal Handling Device for inserting seals into the 1260 LC series pump heads during maintenance

Septum removal tool, knurled handle

Solvent mixer. 100x4.6mm

Test Capillary 0.25 x 500 mm no fittings. special module diagnostic capillary, one end without socket

Torx bit, 10 x 25 mm

Tool for Micro seat capillary mounting

Screw driver, torque, preset adjustable

Tubing cutter blades, for Hi-Duty, 5/pk

Tubing cutter, for copper tubing

Tubing cutter, Hi-Duty, for 1/8 in tubing

Tubing cutter, Precision, for 1/16 in stainless steel tubing

Torque driver extension

Tweezer, 4 3/4 in long

Torque driver kit, includes torque driver extension and preset adjustable torque screw driver

UIB Clamp Guide Kit

Velocity regulator 3/pk

Window Etching tool, 3/pk

Wrench, adjustable, 12 in

Wrench, open end, 0.25 inch

Wrench, open end, 0.3125 inch

Wrench, open ended, 1/2 and 9/16 inch

Wrench, open, 19 mm

Wrench, open-ended, 12 mm

Wrench, open-ended, 14 and 17 mm

Wrench, open-ended, 14 mm and 14 mm, 3 mm thick, 131 mm long, 15° and 75°

Wrench, open-ended, 4 mm

Wrench, open-ended, 7/16 in and 3/8 in

Wrench, open-ended, 7/16 in and 9/16 in

Wrench, open-ended, 9/16 in and 5/8 in

Wrench, torque, 1 to 25 Nm, with 14 mm open wrench. For maintenance of 1290 Infinity and 1290 Infinity II pumps.

DB-624 J&W GC Column, 100 m, 0.53 mm, 3.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-624 GC Column, 10 m, 0.20 mm, 1.12 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W DB-624 GC Column, 105 m, 0.53 mm, 3.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all n

J&W DB-624 GC Column, 15 m, 0.53 mm, 3.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 20 m, 0.18 mm, 1.00 µm, 5 inch cage

J&W DB-624 GC Column, 25 m, 0.20 mm, 1.12 µm, 5 inch cage

J&W DB-624 GC Column, 25 m, 0.20 mm, 1.12 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 25 m, 0.20 mm, 1.12 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W DB-624 GC Column, 30 m, 0.25 mm, 1.40 µm, 5 inch cage

J&W DB-624 GC Column, 30 m, 0.25 mm, 1.40 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 30 m, 0.32 mm, 1.80 µm, 5 inch cage

J&W DB-624 GC Column, 30 m, 0.32 mm, 1.80 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 30 m, 0.45 mm, 2.55 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 30 m, 0.53 mm, 3.00 µm, 5 inch cage

J&W DB-624 GC Column, 30 m, 0.53 mm, 3.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 30 m, 0.53 mm, 3.00 µm, LTM column module. This format is only compatible with Agilent Low Thermal Mass Series Rapid Heating/Cooling (LTM) Systems.

J&W DB-624 GC Column, 60 m, 0.25 mm, 1.40 µm, 5 inch cage

J&W DB-624 GC Column, 60 m, 0.25 mm, 1.40 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 60 m, 0.32 mm, 1.80 µm, 5 inch cage

J&W DB-624 GC Column, 60 m, 0.32 mm, 1.80 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 60 m, 0.53 mm, 3.00 µm, 5 inch cage

J&W DB-624 GC Column, 60 m, 0.53 mm, 3.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 75 m, 0.45 mm, 2.55 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 75 m, 0.53 mm, 3.00 µm, 5 inch cage

J&W DB-624 GC Column, 75 m, 0.53 mm, 3.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-624 GC Column, 20 m, 0.18 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

2-position/6-port injection valve, 400 bar. for Agilent 1100 autosampler

6-column selector valve, 600 bar, preparative LC

2-position/6-port injection valve, 600 bar

6-Column Selector Valve, analytical, Bio-compatible. 1290 Infinity II Bio LC System

2-position/6-port injection valve, bio-inert. for 1260 Infinity bio-inert high performance autosampler (G5667A)

Adapter profile, for G1170A Infinity valve drive

Column switching valve kit 1100 capillary system

Injection valve actuator. for 1290 Infinity Autosampler

Bio inert rotor, 2-position/10-port, 600 bar

Bio-inert rotor seal, PEEK, for Bio-inert 4 column selection valve

Rotor seal, 2 grove, elongated groove, for 1260 Infinity II multisampler (G7167A)

Rotor seal, peripheral valve, 1300 bar. for 1290 Infinity II multisampler (G7167B)

Rotor seal, valve DN. 1300 bar, for 1290 Infinity II multisampler (G7167B)

Rotor-2pos-6port Bio-Multisampler

Stator for 2-position/6-port injection Valve, 600 bar. for 1260 Infinity Autosampler

InfinityLab Quick Change valve head, 2-position/10-port, maximum pressure 800 bar

Rotor, 2 position/6 port bio valve, 600 bar

Stator head, 2-position/6-port valve (p/n 5067-4117 or 5067-4241), maximum pressure 1300 bar

InfinityLab Quick Change valve head, 2-position/6-port, maximum pressure 800 bar

Stator, 2-position/6-port injection valve, maximum pressure 600 bar. for G1329B, G1367C/D/E, 1220 Infinity LC

InfinityLab Quick Change valve head, 4-column selection valve, maximum pressure 800 bar

Stator, for 6-port injection valve, 600 bar, 1260 Infinity II Preparative Autosampler G7157A

InfinityLab Quick Change valve head, 6-column selection valve, maximum pressure 800 bar

InfinityLab Quick Change valve head, 8-column selection valve, 1300 bar

Valve kit 2, pos/6 port, 600 bar

InfinityLab Quick-Change valve head, 2-position/10-port, 1,300 bar. for use with G7116B and G1170A

Valve kit micro, 2 position/6 port, 400 bar

InfinityLab Quick-Change valve head, 2-position/6-port, 1300 bar, for use with G7116B and G1170A

Isolation seal for valves 0101-0921 and 0101-0920

Obsolete. Replaced by 5067-4214

Capillary kit, for preperative column selection valve, flow rate 15–40 mL/min

Capillary kit, for preperative column selection valve, flow rate 4–8 mL/min

Replacement rotor seal for 8/9 port high pressure selector valve

Capillary kit, for preperative column selection valve, flow rates 40–80 mL/min

Capillary kit, for preperative column selection valve, flow rates 80–200 mL/min

Rotor 2 position/10port, 1200 bar

Rotor 2 position/6port 1200 bar

Rotor 5pos/7port purge valve 1300bar bio

Rotor 6 column selector 600 bar SS

Rotor seal 8 pos/9 port 1200 bar

Rotor seal for 6-column Selector valve, Bio-compatible, 1300 bar. 1290 Infinity II Bio LC System

Rotor Seal, 2 pos/14 port preparative valve head, 600 bar

Rotor seal, 5 grooves, max 600 bar. for 2 position / 10port micro column switching pump

Rotor seal, for 6-column selector Quick Change valve head, maximum pressure 800 bar

Rotor seal, PEEK, 8-column selector, 1,300 bar

Rotor, 6-column selector, 1200 bar

Rotor, for use with 6-column selector valve head, preparative scale (p/n 5067-6722)

Valve head, 8-position/9-port, maximum pressure 1200 bar. for 1290 quarternary pump

Stator face for Bio-inert 4 column selection valve

Stator for 6-column selector valve, Bio-compatible, 1300 bar. 1290 Infinity II Bio LC System

Stator head, 2-position/10-port micro valve (p/n 5067-4144), maximum pressure 600 bar

Stator head, 2-position/10-port valve. for use with 1200bar and 1300bar 2 pos - 10 port valves

Stator head, 4-column selection valve, bio-inert (p/n 5067-4134), maxiumum pressure 600 bar

Stator head, 6-column selection valve (p/n 5067-4146 or 5067-4142), maximum pressure 1200 bar

Stator head, bioinert, 12-position/13-port valve (p/n 5067-4259), 200 bar

Stator MP35N for 2position / 10port valve Bio-LC

Stator, 8-position/9-port valve

Stator, for use with 6-column selector valve head, preperative scale (p/n 5067-6722)

Stator, for 8-column selector valve, 1,300 bar

Valve head, 12-position/13-port valve, 200 bar, 10-32 ports

Valve head, 2-position/10-port micro valve, 600 bar

Valve head, 6-Column Selector, 1300bar

Valve head, bio-inert, 2-position/10-port valve, 600 bar

Valve head, bio-inert, 4-column selection valve, 600 bar

Valve head, preparative, 2-position/10-port valve, 600 bar

Valve, 2 position/10 port, 1300 bar, bio

Rebuild kit, for G1160A Stream select valve

Replacement stator seal and rotor seal, for 8/9 port selector valve, 400 bar

J&W CP-FFAP CB GC Column, 25 m, 0.15 mm, 0.25 µm, 7 inch cage

J&W CP-FFAP CB Intuvo GC column module, 25 m, 0.32 mm, 0.3 µm. (compatible only with the Intuvo 9000 GC System)

J&W CP-FFAP CB GC Column, 25 m, 0.32 mm, 0.30 µm, 5 inch cage

J&W CP-FFAP CB GC Column, 25 m, 0.32 mm, 0.30 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W CP-FFAP CB GC Column, 25 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

2-position 6-port prep manual injection valve. front loading, 5/16-24 thread ports, includes: 1/16" PEEK needle, needle port cleaner, 10mL sample loop stainless steel, 1/8" to 1/16

Adapter, PEEK, female 1/8 inch to male 1/16 inch, 4/pk

Bearing ring for 2D-LC valve head, 1300 bar. Material: Rulon/PTFE

Extension kit for preparative LC loops, 1/8 in od. Includes two bent loop adapters that connect a 1/8 in od (5/16 in-24 thread) fixed loop with the 10-32 thread valve ports of the

Isolation Seal, for manual injection valves of series 7725, 9725, 3725

Manual injection valve 2 position/6 port, 600 bar, for 1220 sampler

Manual injection valve kit, stainless steel, prep. includes: manual prep injection valve, start stop cable, Ring stand mounting bracket, capillary from sampler to column, capillary

Manual injection valve, 2 position/6 port valve 7725i, 400 bar, with position sensing switches. for Agilent G1328A/b manual injector

Manual injection valve, 2 position/6 port valve 7725i, 600 bar, with position sensing switches. for Agilent G1328C manual injector

Internal reducers (IZR) stainless steel, female 10-32 to male 5/16-24 coned. for prep manual injection valve G1328D

Maintenance kit for preparative manual injectors. includes the following parts 1 each: stator face seal, rotor seal, needle guide, needle port cleaner, 9/64 and 5/64 hex wrench use

Holder, for mounting the preperative manual injector to the prep column organizer

J&W CP-Volamine GC Column, 15 m, 0.32 mm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Ag

J&W CP-Volamine GC Column, 30 m, 0.32 mm, 5 inch cage

J&W CP-Volamine Intuvo GC column module, 30 m, 0.32 mm. (compatible only with the Intuvo 9000 GC System)

J&W CP-Volamine GC Column, 30 m, 0.32 mm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Ag

J&W CP-Volamine Intuvo GC column module, 60 m, 0.32 mm. (compatible only with the Intuvo 9000 GC System)

J&W CP-Volamine GC Column, 60 m, 0.32 mm, 5 inch cage

J&W CP-Volamine GC Column, 60 m, 0.32 mm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non-Ag

J&W HP-88 GC Column, 100 m, 0.25 mm, 0.20 µm, 5 inch cage

J&W HP-88 GC Column, 100 m, 0.25 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W HP-88 GC Column, 30 m, 0.25 mm, 0.20 µm, 5 inch cage

J&W HP-88 GC Column, 30 m, 0.25 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non

J&W HP-88 GC Column, 60 m, 0.25 mm, 0.20 µm, 5 inch cage

J&W HP-88 GC Column, 60 m, 0.25 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all non

J&W HP-88 Intuvo GC column module, 60 m, 0.25 mm, 0.2 µm. (compatible only with the Intuvo 9000 GC System)

J&W CP-Select 624 Hexane GC Column, 30 m, 0.32 mm, 1.80 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC syst

J&W CP-Select 624 Hexane Intuvo GC column module, 30 m, 0.32 mm, 1.8 µm. (compatible only with the Intuvo 9000 GC System)

J&W CP-Select 624 Hexane GC Column, 30 m, 0.53 mm, 3.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC syst

J&W CP-Select 624 Hexane GC Column, 60 m, 0.32 mm, 1.80 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC syst

J&W DB-FastFAME GC column, 20 m, 0.18 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W DB-FastFAME GC column, 30 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and a

J&W DB-FastFAME GC column, 60 m, 0.25 mm, 0.25 µm

J&W DB-FastFAME GC column, 90 m, 0.25 mm, 0.25 µm

J&W DB-FastFAME Intuvo GC column, 60 m, 0.25 mm, 0.25 µm. (compatible only with the Intuvo 9000 GC System)

J&W DB-FastFAME Intuvo GC column module, 20 m, 0.18 mm, 0.20 µm. (compatible only with the Intuvo 9000 GC System)

J&W DB-FastFAME Intuvo GC column module, 30 m, 0.25 mm, 0.25 µm. (compatible only with the Intuvo 9000 GC System)

J&W CP-Select for MTBE GC Column, 50 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W DB-Select 624 UI for USP 467, 15 m, 0.25 mm, 1.40 µm GC column

J&W DB-Select 624 UI for USP 467, 30 m, 0.32 mm, 1.80 µm GC column

J&W DB-Select 624 Ultra Inert GC Column, 30 m, 0.25 mm, 1.40 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC

J&W DB-Select 624 Ultra Inert GC Column, 60 m, 0.25 mm, 1.40 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC

J&W DB-Select 624 Ultra Inert GC Column, 60 m, 0.32 mm, 1.80 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC

J&W DB-Select 624 Ultra Inert GC Column, for United States Pharmacopeia Residual Solvent Method 467, 30 m, 0.53 mm, 3.0 μm, 7 inch cage. This is the most common GC column format compatible wi

J&W CP-Sil 5 CB for formaldehyde, 60 m, 0.32 mm, 8.00 μm, 5 inch cage

J&W CP-Sil 5 CB for formaldehyde, 60 m, 0.32 mm, 8.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W DB-FATWAX Ultra Inert GC column, 20 m, 0.18 mm, 0.18 µm

J&W DB-FATWAX Ultra Inert GC column, 30 m, 0.25 mm, 0.25 µm

J&W DB-FATWAX Ultra Inert GC column, 30 m, 0.32 mm, 0.25 µm

J&W DB-FATWAX Ultra Inert Intuvo GC column module, 20 m, 0.18 mm, 0.18 µm. (compatible only with the Intuvo 9000 GC System)

J&W DB-FATWAX Ultra Inert Intuvo GC column module, 30 m, 0.25 mm, 0.25 µm. (compatible only with the Intuvo 9000 GC System)

J&W DB-FATWAX Ultra Inert Intuvo GC column module, 30 m, 0.32 mm, 0.25 µm. (compatible only with the Intuvo 9000 GC System)

J&W CP-Select 624 CB Intuvo GC column module, 30 m, 0.32 mm, 1.8 µm. (compatible only with the Intuvo 9000 GC System)

J&W CP-Select 624 CB GC Column, 105 m, 0.53 mm, 3.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W CP-Select 624 CB GC Column, 25 m, 0.15 mm, 0.84 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W CP-Select 624 CB GC Column, 30 m, 0.25 mm, 1.40 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W CP-Select 624 CB GC Column, 30 m, 0.32 mm, 1.80 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W CP-Select 624 CB GC Column, 30 m, 0.53 mm, 3.00 µm, 5 inch cage

J&W CP-Select 624 CB GC Column, 30 m, 0.53 mm, 3.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W CP-Select 624 CB GC Column, 60 m, 0.25 mm, 1.40 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W CP-Select 624 CB GC Column, 60 m, 0.32 mm, 1.80 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W CP-Select 624 CB GC Column, 75 m, 0.53 mm, 3.00 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems

J&W CP-Sil 88 for FAME GC Column, 100 m, 0.25 mm, 0.20 µm, 5 inch cage

J&W CP-Sil 88 for FAME GC Column, 100 m, 0.25 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC syste

J&W CP-Sil 88 for FAME GC Column, 50 m, 0.25 mm, 0.20 µm, 5 inch cage

J&W CP-Sil 88 for FAME GC Column, 50 m, 0.25 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W CP-Sil 88 for FAME GC Column, 60 m, 0.25 mm, 0.2 µm, 5 inch cage

J&W CP-Sil 88 for FAME GC Column, 60 m, 0.25 mm, 0.20 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC system

J&W CP-Sil 8 CB for Amines GC Column, 25 m, 0.15 mm, 2.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC sy

J&W CP-Sil 8 CB for Amines GC Column, 30 m, 0.25 mm, 0.25 µm, 5 inch cage

J&W CP-Sil 8 CB for Amines GC Column, 30 m, 0.25 mm, 0.25 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC sy

J&W CP-Sil 8 CB for Amines GC Column, 30 m, 0.25 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC sy

J&W CP-Sil 8 CB for Amines GC Column, 30 m, 0.25 mm, 0.50 μm, 5 inch cage

J&W CP-Sil 8 CB for Amines GC Column, 30 m, 0.32 mm, 1.00 µm, 5 inch cage

J&W CP-Sil 8 CB for Amines GC Column, 30 m, 0.32 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC sy

J&W CP-Sil 8 CB for Amines GC Column, 30 m, 0.53 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC sy

J&W CP-Sil PONA for ASTM D5134-90 GC Column, 50 m, 0.21 mm, 0.50 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 serie

J&W DB-VRX GC Column, 30 m, 0.25 mm, 1.40 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-VRX GC Column, 30 m, 0.32 mm, 1.80 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-VRX GC Column, 30 m, 0.45 mm, 2.55 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-VRX GC Column, 40 m, 0.18 mm, 1.00 µm, 5 inch cage

J&W DB-VRX GC Column, 60 m, 0.25 mm, 1.40 µm, 5 inch cage

J&W DB-VRX GC Column, 60 m, 0.25 mm, 1.40 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-VRX GC Column, 60 m, 0.32 mm, 1.80 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-VRX GC Column, 75 m, 0.45 mm, 2.55 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-VRX Intuvo GC column module, 60 m, 0.25 mm, 1.40 µm. (compatible only with the Intuvo 9000 GC System)

J&W DB-VRX GC Column, 20 m, 0.18 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W DB-VRX GC Column, 40 m, 0.18 mm, 1.00 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all no

J&W CP-Sil 88 GC Column, 25 m, 0.25 mm, 0.20 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W CP-Sil 88 GC Column, 25 m, 0.32 mm, 0.20 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W CP-Sil 88 GC Column, 50 m, 0.25 mm, 0.20 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W CP-Sil 88 GC Column, 50 m, 0.32 mm, 0.20 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W CP-Sil 88 for FAME Intuvo GC column module, 60 m, 0.25 mm, 0.2 µm. (compatible only with the Intuvo 9000 GC System)

J&W CP-Sil 88 Intuvo GC column module, 50 m, 0.25 mm, 0.2 µm. (compatible only with the Intuvo 9000 GC System)

J&W CP-SimDist GC Column, 10 m, 0.32 mm, 0.10 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W CP-SimDist GC Column, 10 m, 0.53 mm, 0.10 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and al

J&W CP-SimDist GC Column, 5 m, 0.53 mm, 0.17 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W CP-SimDist, 5 m, 0.53 mm, 0.88 µm GC column

J&W CP-TAP CB GC Column, 25 m, 0.25 mm, 0.10 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems and all

J&W CP-TAP CB GC Column, 25 m, 0.25 mm, 0.10 µm, UltiMetal, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC syst

J&W CP-TAP CB Intuvo GC column module, 25 m, 0.25 mm, 0.1 µm. (compatible only with the Intuvo 9000 GC System)

J&W CP-TCEP for Alcohols in Gasoline GC Column, 50 m, 0.25 mm, 0.40 µm, 5 inch cage

J&W CP-TCEP for Alcohols in Gasoline GC Column, 50 m, 0.25 mm, 0.40 µm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 se

J&W CP-Wax 51 for Amines GC Column, 25 m, 0.25 mm, 0.20 μm, 7 inch cage. This is the most common GC column format compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC syst