Расходные материалы для ГХ МС

5973 Inert Source Washer

EI calibration valve assembly. For GC/MS manifolds, performance turbo, standard turbo and diffusion pumps

5975C EI 350 repeller block, used with series 5975, system 5975C

8270 semivolatiles applications kit. Includes HP-5ms column, 3 liners; ion source body; repeller; drawout plate

Anodized Repeller Assembly, SST

Ferrule, 0.5 mm id, 15% graphite/85%Vespel, 0.32 mm column, 10/pk

Benzophenone CI sensitivity sample, 50 pg/mL

Calibrant Bulb

Ferrule, 0.8 mm id, 15% graphite/85% Vespel, 0.45 to 0.53 mm column, 10/pk

CI calibration valve assembly. For GC/MS CI flow control modules

Inlet liner O-ring, non-stick fluorocarbon, 10/pk

Ceramic source board and cable assembly

Swaging nut, Ultimate Union and QuickSwap

CI dummy filament

CI interface tipseal

Ferrule no-hole 15%/85% graphite/Vespel 10/pk

CI ion focus lens

CI lens insulator

CI repeller

CI source body

Column nut for inlet with long or long 2-hole ferrule

Column nut for MS interface

Curved spring washer, 1.6 to 1.8 mm id, 4 mm od, stainless steel (SST)

Curved spring washer, 2.2 mm id, 4.5 mm od

Diffusion pump baffle adapter spool, for gas chromatography/mass spectrometry diffusion pumps

Drawout cylinder

CI drawout cylinder, for GC/MS CI ion sources

Drawout plate, 3 mm

Drawout plate, 3 mm, for inert source

Drawout Plate, 6 mm

Drawout plate, 6 mm, inert

Drawout plate, 73CI, for Agilent 5975 MSD

EI 350 inert ion source assembly, used with series 5977 gas chromatography/mass spectrometry systems

EI 350 ion source extraction assembly,

EI inert 350 ion source assembly. For gas chromatography/mass spectrometry EI ion sources and analyzers

Electron multiplier

Electron multiplier assembly

Electron multiplier horn, straight

Electron multiplier, 5971/72/73, GCD.

Entrance Lens – HydroInert

Entrance Lens - Extended - HydroInert

Entrance lens assembly

Evaluation standard, internal EI and CI, 2 pg/μL OFN, 5 pg/μL

Ext Source Body – HydroInert

Extractor Lens – 3mm - HydroInert

Extractor Lens – 6mm - HydroInert

Extractor Lens – 9mm - HydroInert

Fastener strike with compression spring

Ferrule One Piece Fused Silica Adapter

Ferrule, 0.3 mm id, preconditioned for MSD interface, 15% graphite /85% Vespel, 0.1 mm column, long

Filament assembly, for Agilent 5970 GC (EI/CI), 2/pk

Filament assembly, for Agilent 5971 MSD

Filament disk assembly

Fuse, metric, 8A, 250 V, TD FE UL-REC CSA

H2 EI Heater/Sensor Assy - HydroInert

H2 EI Repeller Assy - HydroInert

Heater/probe for FLD detector oven, used with gas chromatography/mass spectrometry systems, model 220-MS

High-energy dynode, for Agilent 5973 MSD

Insert – HydroInert

Ion detection PWA assembly, used with gas chromatography/mass spectrometry systems, model 240-MS

Ion focus lens

Ion Focus Lens – HydroInert

Ion source assembly, inert, for Agilent 5975/5973 MSD

Ion source body, for Agilent 5973/75, 5977 Inert MSD

Ion source chamber

Lens insulator. For Agilent 597X MSD

Machine screw assembly, M3 x 0.5, 8 mm long,

Machine screw assembly, M4 x 0.7 x 16 mm long, for heater sleeve

Micro-ion vacuum e-gauge for GC/MS

New-24V IDP3 scroll pump with valve

NEW-SQ 5975 5977A/B PCA Sideboard, Sup

O-ring

O-ring, 6 mm x 2.2 mm, fluorocarbon

O-ring, fluoroelastomer, clean, 0.114

Obsolete. No replacement recommendation. Test standard for external NCI, 1 pg/µL DFB

Obsolete. No replacement recommendation. Manifold window O-ring

Obsolete. No replacement recommendation. Ion gauge tube, with K-25 flange

Pfeiffer turbo pump HiPace 300, used with series 5975,

Phillips pan head screw, stainless steel, M4 x 0.7 x 12 mm

Power supply, 125 W, 24 V, 4.2 A, ROHS

Repeller – HydroInert

Repeller assembly. 

Repeller assembly, EI 350, stainless stee

Repeller assembly, inert, EI,

Repeller block, 5973, 5975C EI Inert 350

Repeller heater assembly, CI 350

Repeller insulator.

Repeller insulator, for GC/MS CI ion sources

Repeller ultra-clean

Repeller

Socket head cap screw, M2 X 0.4, 6 mm long, analyzer screw for quad stop, for GC/MS

Screw, socket-head cap for mounting filaments

Seal, base plate/manifold

Self Tightening column nut, for Agilent mass spec interface transfer line

SEM screw, 8-32 x 1/4

Setscrew, for Agilent 5971/72/73 MSD

Setscrew, M3 x 0.5, 3 mm long, gold-plated

SmartCard 3.2 for 5977 e-module

Socket head cap screw, M2 x 0.4 x 8 mm

Source heater/sensor, CI 350

AVF 60 gold oil

Diffusion pump oil, Convalex 10, 128 mL

Dry pump exhaust silencer

Elbow, rough pump

DS42 exhaust filter, 3/4 G - 3/8 G

Exhaust filter, for DS rotary vane pumps (NW25)

Fill plug, 1/4 in, slotted, plastic, red, for gas chromatography/mass spectrometry foreline pumps

Foreline Pump Exhaust Fitting

GC/MS fitting, vacuum hose, 1/pk

Oil drain extension adaptor, 3/8 in

Oil mist filter for RV5 pump, for MS, SCD/NCD

Oil Mist Filter, 3/8 BSP Male Threads

Oil return system kit, for DS-102 to DS-602 rotary vane pumps

Replacement cartridge (2/pack) for DS series oil mist eliminator (9499395)

Hand tool to remove oil plug, M5, 5 mm

Turbo pump lubricant, Oerlikon Balzers, 250 mL

Vacuum pump, DS 202 Rotary Vane Pump, 240V

Foreline (roughing) pump oil, 1 L

Gauge tube for measuring vacuum

Oil mist exhaust filter, DS42

Ferrule, 0.4 mm id, 15% graphite/85%Vespel, 0.1 to 0.25 mm column, 10/pk

Ferrule, 0.4 mm id, preconditioned for MSD interface, 15% graphite/ 85% Vespel, 0.25 mm column, long, recommended Agilent GC/MS transfer lines with MS interface column nut, p/n 05988-20066, 1

Centering ring with O-ring

Column installation tool

Ferrule kit, SilTite, for 1/16 in stainless steel purge tube. Includes 2 column nuts, 10/pk

GC/MS tool kit and cleaning supplies

One-year maintenance kit

Refill, sorbent trap, activated alumina, 1 lb can

Universal inlet filter replacement kit

Ferrule, 0.5 mm id, preconditioned for MSD interface, 15% graphite/85% Vespel, 0.32 mm column, long, recommended Agilent GC/MS transfer lines with MS interface column nut, p/n 05988-20066, 10

Mass spectrometer expendable supplies kit, for systems with DS102. Includes PFTBA calibration compound, cal-gas glass chamber, capillary injector nut, O-rings, cotton tipped applicators, endc

PFTBA Sample Bulb

QuickProbe liner, Ultra Inert, 4 mm id, frit

QuickProbe probe pocket tip, 100/pk

QuickProbe probe, holder

QuickProbe probe, round tip, 100/pk

QuickProbe TSP, probe holder

GC/MS checkout standard, for GC/MS, Contains 6 ampoules: 4 at 10 ng/µL, 1 at 100 pg/µL, and 1 at 100 ng/µL, each of dodecane biphenyl, p-chlorodiphenyl, and methyl palmitate in isooctane, 1 m

GC/MS checkout standard, for High Mass, PFHT, 3 x 1 mL

GC/MS Internal reference mass (IRM) standard, for GC/TOF, neat PFET, 1 x 0.5 mL

GC/MS Performance verification standard, CI positive mode, Benzophenone, 100 pg/µL, in isooctane

GC/MS Performance verification standard, for EI, 1 pg/µL OFN, in isooctane, 3 x 1 mL

GC/MS Performance verification standard, for EI/NCI, 100 fg/µL OFN, in isooctane, 3 x 1 mL

GC/MS pesticide checkout std 100 µg/L 3 x 1 mL, (Dichlorvos, Mevinphos, Ethalfluralin, Trifluralin, Atrazine, Chlorpyriphos-methyl, Heptachlor, Malathion, Dieldrin, 4,4’-DDE, Hexazinone, Prop

GCMS Tuning Standard - PFTBA

Performance verification standard, for EI, 5 pg/µL Octafluoronapthalene (OFN), in isooctane, 5 x 1 mL

Tuning standard, for GC/MS, neat perfluoro-5,8-dimethyl-3, 6,9-trioxidodecane (PFTDT), 1 mL

PFTBA sample, 10 g

HydroInert Complete Source Assembly for 5977. HydroInert Complete Source Assembly for 5977

HydroInert Complete Source Assembly for 7000 TQ

HydroInert GC/MSD Upgrade. Contains parts needed to upgrade an existing 5977A/B/C Inert Plus Source

HydroInert GC/TQ Upgrade. Contains parts needed to upgrade an existing 7000C/D/E Inert Plus Source

Install Kit for GCs, Stainless Steel. Contains 1/8” stainless steel tubing, fittings, Big Universal Trap with stainless steel fittings, and tool kit

5005-0438 Filter element, for IDP-3 dry scroll vacuum pump exhaust silencer

Vibration isolation kit. Contains 4 x zinc Keps nut (6 mm), 4 x vibration isolation mount, 4 x rubber anti-skid pad, 1 x RoHS addendum for vacuum technologies, 1 x safety information booklet

IDP-3 tip seal kit

IDP15 tip seal kit for GC/QTOF

IDP-3 scroll pump, for Turbo 597X

Upgrade kit, IDP-10, for GC/QQQ. Includes an IDP-10 pump with isolation valve, foreline hose, fittings, clamps, and an installation manual.

Tip seal replacement kit, for IDP-10 vacuum pump

Gas ballast kit. Contains 1 x ASP-1BV breather vent, 1 x brown FKM O-Ring (2-010), 1 x pipe adapter, 1 x RoHS addendum for vacuum technologies.

Tip seal, for IDP-10. Tip seal only.

IDP3 tip seal maintenance kit